User manual SOLAC AR6290

[. . . ] Do not use the rice cooker for purposes other than those described in this manual. ⷠDo not switch it on without making sure that the voltage stated on the specifications plate matches that in your home. ⷠMake sure you plug the appliance into a socket that has a suitable earth connection. [. . . ] Do not exceed the last mark on the inside of the container, as otherwise when boiling, the contents could overflow and be burned. : When you want to dispose of the appliance, NEVER throw it in the bin. Take it to your nearest RECYCLING POINT or waste collection centre for treatment. 2 Add water , depending on the type of rice used and the amount of cooking required. If using the dispensing vessel, the marks inside the container indicate the quantity of water that must be added. For example: if you add 5 glasses of rice pour the water in until it reaches the mark corresponding to 5 on the inside of the container (2). 1) 3 Put the container (2) inside the casing and move it gently, making sure it touches the heating plate (3). 4 Plug the connection cord (7) into the socket (6) and connect the other end to the mains. Then press the switch by selecting the cooking position, when the red pilot lamp (9) will light up, indicating that the rice is being cooked (fig. 5 Once the rice is cooked, after approximately 20 minutes, the switch (11) will automatically move to the heating function, when the orange pilot light (10) will go on. 7 While the heating function is selected , the rice temperature will be maintained at between approximately 60ºC and 70ºC. 8 Unplug the connection cord when the rice no longer needs to be kept warm, and in all cases before removing the container (2). Use the switch to select the cooking position and maintain this position for the required length of time, depending on the type of food (vegetables, fish. In this case, the appliance will not automatically change to the warming function, but continue in the cooking position, provided there is water inside the container. [. . . ] Clean the container using water and a non-corrosive detergent for best results. The container and casing must always be cleaned to prevent any food The appliance has been plugged into the mains, to select the cooking position with the switch (11), the container must be placed inside the casing (5) with some weight inside, as if not, the switch will not allow you to select this position. However, do not plug in the rice cooker if the container is not inside or empty, since the warming function will start to operate. [. . . ]