User manual SOLAC CA4805

[. . . ] Thank you for choosing this Solac product and for placing your trust in our brand. This super-automatic coffee maker has a maximum performance pressure pump (18 Bar) to offer you the best professional espresso coffee in the comfort of your home. You can easily select the espresso function with the switches and lights, which will indicate each function selected. We recommend you read the instructions handbook carefully to discover all the options your Espression has to offer. [. . . ] When the coffee machine stops pouring the coffee, the two coffee extraction selectors will light up again and the light on the top bar will return to the pre-selected position. After pouring the coffee, the coffee machine will be ready to prepare more coffee. B) Coffee made with previously ground coffee The coffee machine will be prepared to use ground coffee, without the need to use a coffee grinder. This function is quite useful when you wish to prepare decaffeinated coffee. Next, the coffee-maker performs a preliminary infusion of the ground coffee. The coffee bar is previously injected with hot water that is evenly distributed throughout the coffee. Note: when you are using ground coffee, you can not prepare two cups at the same time, so that only the selector for one cup will be lit. When the coffee machine stops dispensing the coffee, you can pick up your cup. If you are not going to prepare any more coffee using ground coffee, press the ground coffee button again. IMPORTANT: While the coffee machine is pouring the coffee, you can stop the extraction process by pressing the extraction selector for 1 coffee cup. Note: the process will stop if you open the side door or remove the drip tray during the extraction or brewing process. Turn the steam regulator counter clockwise until it reaches the stop (180º). Press the "hot water" button again to deactivate this function. The two coffee extraction selectors will light up again, indicating that the coffee machine is ready to prepare coffee. The steam symbol icon will start to flash while the coffee machine is heating up and the light of the two coffee extraction selectors will turn off. The hot water icon will light up and the coffee extraction selector lights will turn off. When the coffee machine is ready to obtain steam, the light will be permanently set. Place a container under the steamer, open it by turning the steam regulator counter clockwise to drain any residual water that could be present in the steamer. Remove the cup or jug with the liquid when it is hot or when the milk has been skimmed or heated. Do not pour water into the tank yet, since you must prepare the decalcification solution first. Owing to the lengthiness of this process, you need to confirm that you want to carry it out at that time. Before confirming, make sure you have poured the removal agent into the water tank. [. . . ] The coffee-maker will not make any more cups of coffee until the brewing unit has been fitted. The coffee-maker will not make more cups of coffee until the drip tray has been put in position. - The coffee-maker will continue to make coffee but indicate that the lime scale needs to be removed from the machine. - The coffee-maker will not make any more cups of coffee until the coffee grounds have been emptied COMMENT - RESET THE COFFEE-MAKER SOFTWARE by turning off the main switch (position `0'), wait a few seconds and then turn it on again. [. . . ]