User manual SOLAC CA4806

[. . . ] Its menu is highly intuitive and easy to use so that you can adapt the machine to your personal preferences without any great complications. We recommend you read the instructions handbook carefully to discover all the options your Espression Supremma has to offer. We hope you enjoy this coffee-maker and the delicious coffee it makes. Please read these instructions carefully before using the coffee-maker for the first time. [. . . ] Espresso coffee 1 coffee cup 2 coffee cups Check that you have adjusted the coffee-maker to obtain the coffee you prefer. The first coffee you get from your coffeemaker will not be good quality. This occurs because the first time the grinder is used, it cannot load the complete amount required by the brewing unit. A frame will appear around the selected button to indicate your selection. Espresso coffee Large coffee To use espresso cups, slide the coffee outlet down to the bottom position. D) Adjusting the amount of water per cup To adjust the amount of water per cup, press the following buttons: 1 coffee cup 2 coffee cups Next, the coffee-maker performs a preliminary infusion of the ground coffee. The coffee is injected with hot water, which is distributed evenly around the coffee. the preliminary infusion obtains the maximum aroma and flavour of the coffee. During the preliminary infusion, you will see the following symbol on the screen: Use the dispensing spoon to calculate the amount of ground coffee. During the extraction of the coffee, you will see the following symbols on the screen: 1 coffee cup 2 coffee cups 7. When the coffee-maker finishers dispensing the coffee, it will indicate that you can remove the cups through icons and beeps, as long as you have the beeps option activated. Do not pour water in yet; to remove the lime scale, you have to prepare the removal solution. Owing to the lengthiness of this process, you need to confirm that you want to carry it out at that time. Before confirming, make sure you have poured the removal agent into the water tank. In addition, we recommend you eliminate any coffee remains that may have been left in the piston filter using the brush included in the accessories box. When handling the unit for cleaning, the internal system that compacts the coffee may move easily. To return it to its original position, use the brewing unit spanner supplied with the coffee-maker. Does not contain any traces of water left in the pipes from coffee made previously. 2) Before turning off and to prevent the coffee outlet from being blocked with coffee remains, the coffee-maker expels a little water and cleans the coffee outlet. This function has been designed to save you from having to carry out this cleaning process manually. The coffee-maker is programmed for use without it being necessary to modify any parameters, but it offers the possibility of adapting it to your personal preferences easily and intuitively. By default, the coffee-maker is programmed with a certain amount of water for an espresso or large coffee. [. . . ] The coffee-maker has finished removing the lime scale from the pipes and has poured the removal agent on to the drip tray, which is now full. First of all, empty it and then fill the water tank with clean water for the rinse cycle. RESET THE COFFEE-MAKER SOFTWARE by turning off the main switch (position `0'), wait a few seconds and then turn it on again. If, after turning off and turning on the coffee-maker, the symbol continues, THE COFFEE-MAKER NEEDS TO BE REPAIRED AT AN AUTHORISED TECHNICAL SERVICE CENTRE. [. . . ]