User manual SOLAC CA4815

[. . . ] Thank you for choosing this Solac product and for placing your trust in our brand. This super-automatic coffee-maker has a maximum performance pressure pump (18 Bar) to offer you the best professional espresso coffee in the comfort of your home. With the touchscreen technology, you can easily select the espresso you prefer by pressing directly on the digital screen. This high-tech coffee-maker will tell you at any given moment which selection you have made and what it is making by means of graphic messages. [. . . ] When you use ground coffee, you cannot make two cups of coffee at the same time. When the coffee-maker finishes dispensing the coffee, you can remove the cup. If you are not going to any make more cups of coffee using ground coffee, press the `one coffee bean' or `two coffee beans' button. This coffee-maker can use ready-ground coffee without needing to use the grinder. This function is particularly useful when making decaffeinated coffee. While the coffee-maker is dispensing the coffee, you can stop the extraction by pressing the ESCAPE button. If the side door is opened or if the drip tray is removed during the extraction or brewing process, the process will stop. When the coffee-maker is ready to obtain steam, the steam symbol is displayed on the screen: Place a container under the steam nozzle and open it by turning the steam regulator clockwise to empty any possible residual water that may have been left in the steam nozzle. Close the steam regulator when you have finished heating up the liquid. To heat up the milk and make it frothy, move the cup or jug in circles. This automatic process takes approximately 25 seconds, during which water is expelled through the coffee outlet. If you exit the lime scale removal process once it has begun, press the ESC button for the programme to continue the rinse cycle. This will prevent traces of the removal agent remaining inside the appliance. Once the lime scale removal process has been confirmed, the coffee-maker will indicate that the process is starting on the screen. Once the lime scale removal process has finished, the system must be rinsed to make sure that all remains of the removal agent are removed. The `no water' icon may appear during the lime scale removal and rinse processes. Once the water tank is filled, this symbol will disappear and the process will continue. The screen will indicate the need to fill the water tank with clean water and will tell you to empty the drip tray. Do not place the coffee-maker in water or any other liquid or place any of its parts in a dishwasher. Do not dry the coffee-maker or any of its parts in an oven and/or microwave. Unscrew the steam nozzle together with the outlet and clean all the parts. If it is blocked, clean the air inlet hole of the steam nozzle with a needle to optimise the steam function. [. . . ] When the situation has been corrected, the coffee-maker is again ready to make coffee. If it still does not come on, take the coffee-maker to an authorised technical service centre. The first time the grinder is started, it does not pour sufficient quantity into the brewing unit. The coffee-maker automatically cleans the pipes to make sure the coffee is of optimum quality, free from the remains of previous coffees. [. . . ]