User manual SOLAC CH6301

[. . . ] Our products are designed and manufactured to more than satisfy the expectations of our most demanding customers for a long time. SOLAC domestic appliances also provide the peace of mind of having passed the strictest quality and safety standards. Electrodomésticos SOLAC, considering its drive for continuous improvement, hereby reserves the right to make changes without prior notice. [. . . ] Always unplug the appliance after use and before dismantling or assembling parts, and performing any maintenance or cleaning operations. When plugging in or unplugging the appliance, it must always be turned off. Always unplug the appliance by pulling the connection pin, and not the cord. Never immerse the appliance in water or any other liquid, or wash it in the dishwasher. Before plugging in the appliance, check there is milk or water in the container. The appliance must be connected to a power socket with a suitable ground connection. The temperature of the milk warmer container must be high when the appliance is operating. Do not touch the metal parts of the milk warmer while it is operating. IMPORTANT: When you want to dispose of the appliance, NEVER throw it in the rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your home for processing. Main parts 1 Casing 2 Handle 3 Lid 4 Mains connection pin 5 Cable connector 6 Connector input 7 Appliance base 8 Pilot light Features Electrical features: 220-240V, 50Hz, 400W Capacity: 1 litre Appliance has only been designed for warming milk and liquids, and for preparing hot chocolate. Z Do not use the appliance to heat any other type of liquids other than milk, water, coffee, liquid or chocolate. Z Completely remove all the elements inside or outside the appliance that were used for packing and transporting it. 1 Insert the cord connector (5) into the connector (6) on the base (7) of the milk warmer. [. . . ] 1 Before cleaning the appliance: Unplug the pin (4) from the mains, unplug the milk warmer connector (5) and wait for it to cool. 3 Clean the inside of the milk warmer with soap and water, and rinse with plenty of water. When the appliance is not in use, unplug it and store it in a cool, dry place. [. . . ]