User manual SOLAC DH8935

[. . . ] Read these instructions carefully before using the appliance and keep them handy for future reference. Remove all paper or plastic bags, plastic sheets, cardboard and labels inside or outside of the appliance, which have been used to protect the appliance during transport or during the sale promotion. [. . . ] If the appliance does not work properly or if the power cable is damaged, do not use it, but take it to a Specialised Technical Service Centre. â· If the power cable is damaged, it should be replaced by the manufacturer or by your after-sales service shop or similar qualified personnel to prevent possible hazards. â· Always keep the device in the vertical position and make sure that it is on a flat and stable surface before turning it on. â· Only use the device with the adapter provided with the HYS60-12D device. : When you wish to dispose of the appliance, NEVER throw it in the rubbish. Instead, go your nearest CLEAN POINT or waste collection point, where it will receive subsequent treatment. 1 Connect the adapter to the connector in the device (10) and then connect it to the mains using the other end (Fig. 2 Select the ON position on the ON/OFF switch (3), the pilot light will light up, indicating that the device is operating (2). 4 To turn the device off, select the OFF position on the ON/OFF switch (3). 5 To move the fan to a different place, use the carry handle (8) Extraction of water from the water tank When the water tank is full (its maximum capacity is 1500 ml) the device will stop and the full tank indicator (1) will light up. [. . . ] â· Do not use solvents or abrasive detergents to clean the appliance since you could damage it. â· When the appliance is not in use it should be kept in a place that is protected from the damp. [. . . ]