User manual SONY ICD-B500

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ICD-B500. We hope that this SONY ICD-B500 user guide will be useful to you.


SONY ICD-B500 : Download the complete user guide (623 Ko)

You may also download the following manuals related to this product:

   SONY ICD-B500 (716 ko)
   SONY ICD-B500 (717 ko)
   SONY ICD-B500 (653 ko)
   SONY ICD-B500 (728 ko)
   SONY ICD-B500 (558 ko)
   SONY ICD-B500 (794 ko)
   SONY ICD-B500 (1061 ko)
   SONY ICD-B500 (784 ko)
   SONY ICD-B500 (629 ko)
   SONY ICD-B500 (627 ko)
   SONY ICD-B500 (611 ko)
   SONY ICD-B500 (615 ko)
   SONY ICD-B500 (628 ko)
   SONY ICD-B500 (633 ko)
   SONY ICD-B500 (630 ko)
   SONY ICD-B500 (1498 ko)
   SONY ICD-B500 annexe 2 (718 ko)
   SONY ICD-B500 annexe 1 (726 ko)
   SONY ICD-B500 annexe 1 (723 ko)
   SONY ICD-B500 annexe 1 (727 ko)
   SONY ICD-B500 annexe 1 (728 ko)
   SONY ICD-B500 annexe 1 (773 ko)
   SONY ICD-B500 annexe 1 (722 ko)
   SONY ICD-B500 annexe 1 (631 ko)
   SONY ICD-B500 annexe 1 (629 ko)
   SONY ICD-B500 annexe 2 (729 ko)
   SONY ICD-B500 annexe 1 (745 ko)
   SONY ICD-B500 (622 ko)
   SONY ICD-B500 annexe 3 (720 ko)
   SONY ICD-B500 annexe 1 (623 ko)

Manual abstract: user guide SONY ICD-B500

Detailed instructions for use are in the User's Guide.

[. . . ] Owner's Record The model number is located at the rear and the serial number is located inside the battery compartment. Refer to these numbers whenever you call upon your Sony dealer regarding this product. You can record up to 99 messages in each of the four folders (A, B, C, and D). Since a newly recorded message is automatically added behind the last recorded message, you can start recording quickly without searching for the end of the last recording. [. . . ] After playing back one message, the unit stops at the beginning of the next message. When the continuous play function is set to "ON" (see the reverse side), the unit stops after playing all messages in a folder. When the last message on a folder has been played back, the unit stops at the beginning of the last message. ⷠIf you divide messages frequently, the unit may become unable to divide a message. ⷠYou cannot divide a message in the first or the last 1 second of a message. * About one hour after you pause recording, recording pause is automatically released and the unit goes into the stop mode. When fast playback is done to the end of the last message, "END" flashes for 5 seconds. Pressed while "END" is flashing, the messages are played back rapidly, and normal playback will start at the point you release the button. When "END" stops flashing and the OPR indicator goes off, the unit will stop at the beginning of the last message. If the last message is long and you wish to start playback at a later part of the message, keep >+ pressed to play back the message to the end and then press ­ . (For messages other than the last one, go to the beginning of the next message and play backward to the desired point. Go back to the beginning of the current message skip to the next message go back to previous messages/skip to succeeding messages It takes longer for the unit to start operation. ⷠIf you divide messages too frequently while the unit is recording them, the following phenomenon may occur: The OPR indicator keeps flashing, and you cannot operate the unit for a certain period. Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. Starting recording automatically in response to the sound -- Advanced VOR function When VOR (voice operated recording) is set to ON in the menu, recording starts when the recorder detects sound. ⷠIf you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time. ⷠNo more recording can be made when 99 messages each have been recorded in a folder. ⷠDue to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. If the unit is left unused for more than 3 seconds in the stop mode, the display will show the current time. If recording is not satisfactory after you have changed the microphone sensitivity, or for important recording, set VOR to OFF. Please note that recorded messages may be erased during service or repair work. [. . . ] ⷠIf you divide a message frequently, the unit may become unable to divide a message. ⷠOnce a message is divided, you cannot combine the divided messages with the IC recorder. ⷠIf you divide messages too frequently while the unit is recording them, the following phenomenon may occur: The OPR indicator keeps flashing, and you cannot operate the unit for a certain period. "HOLD" will appear for 3 seconds, indicating that all the functions of the buttons are locked. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-B500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-B500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.