User manual SONY ICD-B600

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ICD-B600. We hope that this SONY ICD-B600 user guide will be useful to you.


SONY ICD-B600 : Download the complete user guide (1510 Ko)

You may also download the following manuals related to this product:

   SONY ICD-B600 (1506 ko)
   SONY ICD-B600 (1508 ko)
   SONY ICD-B600 (1508 ko)
   SONY ICD-B600 (1465 ko)
   SONY ICD-B600 (1501 ko)
   SONY ICD-B600 (1514 ko)
   SONY ICD-B600 (1485 ko)
   SONY ICD-B600 (1507 ko)
   SONY ICD-B600 (1573 ko)
   SONY ICD-B600 (1487 ko)
   SONY ICD-B600 (1487 ko)
   SONY ICD-B600 (1492 ko)
   SONY ICD-B600 (1498 ko)
   SONY ICD-B600 annexe 1 (1541 ko)
   SONY ICD-B600 annexe 1 (1536 ko)
   SONY ICD-B600 annexe 1 (1531 ko)
   SONY ICD-B600 annexe 1 (1537 ko)
   SONY ICD-B600 annexe 1 (1538 ko)
   SONY ICD-B600 annexe 1 (1538 ko)
   SONY ICD-B600 annexe 1 (1532 ko)
   SONY ICD-B600 annexe 1 (1537 ko)
   SONY ICD-B600 annexe 1 (1531 ko)
   SONY ICD-B600 annexe 1 (1683 ko)
   SONY ICD-B600 annexe 1 (1538 ko)
   SONY ICD-B600 annexe 1 (1542 ko)
   SONY ICD-B600 annexe 1 (1554 ko)
   SONY ICD-B600 INSTRUCTION/OPERATION MANUAL (937 ko)
   SONY ICD-B600 (1509 ko)
   SONY ICD-B600 annexe 2 (1530 ko)
   SONY ICD-B600 DATASHEET (465 ko)

Manual abstract: user guide SONY ICD-B600

Detailed instructions for use are in the User's Guide.

[. . . ] BGetting started BBasic Operations Selecting the Microphone Sensitivity Step 1: Installing the Batteries Recording Messages You can record up to 99 messages in each of the four folders (A, B, C, and D). Since a newly recorded message is automatically added behind the last recorded message, you can start recording quickly without searching for the end of the last recording. e. g. Message 1 Message 2 Newly recorded message Blank space 1 Note on recording Noise may be recorded if an object, such as your finger, etc. , accidentally rubs or scratches the unit during recording. Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. or >+ to select "SENS" and press NxPLAY/ENTER. IC Recorder Owner's Record The model number is located at the rear and the serial number is located inside the battery compartment. [. . . ] or >+ to select "FOLDER" and press NxPLAY/ENTER. 1 Press ­ . or >+ to select the digits of the hour. You cannot record messages up to the maximum recording time. · If you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time. · No more recording can be made when 99 messages each have been recorded in a folder. · Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. 4 Press NxPLAY/ENTER at the time signal. The display will return to "SET DATE. " 2 Press NxPLAY/ENTER. If the unit is left unused for more than 3 seconds in the stop mode, the display will show the current time. 3 Press ­ . or >+ to select the folder you want and press NxPLAY/ENTER. 4 Press x(stop) to exit the menu mode. Current folder Recording stops when no sound is heard. ("VOR PAUSE" flashes in the display window. ) Note VOR function is affected by the sound around you. Set the microphone sensitivity to "H (high)" or "L (low)" using the menu. If recording is not satisfactory after you have changed the microphone sensitivity, or for important recording, set VOR to "OFF. " The unit does not operate correctly. · Take out the batteries and insert them again. Please note that recorded messages may be erased during service or repair work. 1 Tip · This unit does not have a power on/off switch. To set the 12-hour display, select "12H" in the "HOUR" menu. In that case, "AM12:00" will appear in step 2-3. Erasing Messages You can erase the recorded messages one by one or all messages in a folder at a time. Note that once a recording has been erased, you cannot retrieve it. BVarious Ways of Recording BOther Functions Adding a Recording to a Previously Recorded Message You can add a recording to the message being played back. The added recording will be placed after the current message and counted as a part of the message. During playback of Message 3 After adding a recording Message 3 Message 4 Dividing a Message You can divide a message during recording or playback, so that the message is divided into two and the new message number is added to the divided message. By dividing a message, you can easily find the point you want to play back when you make a long recording such as a meeting. You can divide messages until the total number of messages in the folder becomes 99. Playing Back a Message at a Desired Time with an Alarm You can sound an alarm and start playback of a selected message at a desired time. If you select "B-ONLY" in Step 6, an alarm sounds only and playback will not start. To cancel the alarm setting before the playback starts Press x(stop) while the alarm sound is heard. Notes · You cannot set the alarm if you have not set the clock or there is no message in the selected folder (the unit will not enter the alarm setting mode when you press DISPLAY/ MENU in Step 2). · If you try to set the alarm to play back a message at a previously set time on another message, "PRE SET" will be displayed, preventing new settings. · If you try to set the alarm to the time before the current time, "BACK-D" appears in the display window and you cannot set the alarm. [. . . ] **The button has a tactile dot. Moving Messages to a Different Folder -- Move Function You can move the recorded messages to another folder. Example: Moving Message 3 in Folder A to Folder C To play back once a week Tape recorder, TV, radio, etc. Press ­ . or >+ to select the day of the week. 1 Tip Even if the HOLD function is activated, you can stop the alarm playback. To stop the alarm or playback, press x(stop). Playing Back All Messages in a Folder Continuously You can play back all messages in a folder continuously. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-B600




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-B600 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.