User manual SONY VAIO VGN-FW590GAB

[. . . ] 4 Strategy for replacing FRUs for CTO, CMV, and GAV 4 Product definition . 4 FRU identification for CTO, CMV, and GAV products 5 Important information about replacing RoHS compliant FRUs . 29 29 29 31 31 31 32 35 38 38 41 41 45 47 47 54 57 59 62 62 67 68 68 69 70 70 © Lenovo 2005. 76 1020 Ultrabay Enhanced device (for R52 series) 77 1030 Hard disk drive . [. . . ] This indicator is on when Bluetooth wireless feature is on and not in suspend mode. To enable or disable the keypad, press and hold the Shift key, and press the NumLk (ScrLk) key. Green: Data is being read from or written to the hard disk drive, the diskette drive, or the drive in the Ultrabay Enhanced device. When this indicator is on, do not put the computer into standby mode or turn off the computer. Note: Do not move the system while the green drive-in-use light is on. This indicator stays lit whenever the computer is on and is not in standby mode. 2 Bluetooth wireless status R 3 Num lock 5 Caps lock 5 Drive in use (continued) ThinkPad R50e, R51e and R52 Series 55 Product overview Indicator 7 Battery status Meaning Green: The battery is in use and has enough power. Blinking green: The battery is being charged, but still has enough power to operate. (At regular intervals, the indicator light turns off briefly. ) Orange: The battery is being charged, but the battery power is still low. When the indicator starts blinking orange, the computer beeps three times. Blinking green: The computer is entering standby mode or hibernation mode, or is resuming normal operation. Blinking green: An Ultrabay Enhanced device is in the process of being detached. To turn the computer display on again, press any key or press the TrackPoint pointing stick. R51e series:Select a power scheme that has been created by Power Manager. A panel for selecting a power scheme appears when this combination is pressed. If the user has logged on with a administrator user ID, and Fn+F3 is pressed, the panel for selecting a power scheme appears. If the user have logged on with another user ID, and Fn+F3 is pressed, the panel does not appear. To return to normal operation, press the Fn key only, without pressing a function key. The setting can be changed so that pressing it puts the computer into hibernation mode or even shuts the computer down. This combination of the keys functions as a toggle switch of the power state. Note: In Windows 2000 or Windows XP, this combination of keys enables or disables the built-in wireless networking features (the IEEE 802. 11 standard) and the Bluetooth wireless features. v ThinkPad Power Management driver v OnScreen Display utility v Wireless device drivers Reserved. Fn+F5 Fn+F6 (continued) ThinkPad R50e, R51e and R52 Series 59 Product overview Key combination Fn+F7 Description Switch a display output location v External monitor (CRT display) v Computer display and external monitor (LCD + CRT display) v Computer display (LCD) Note: For any operating system other than Windows 2000 or Windows XP, no additional procedure is needed; just press Fn+F7. This function does not work when different desktop images are displayed on the computer display and the external monitor (the Extend desktop function). [. . . ] Denmark European countries India, South Africa Israel Italy Japan Korea China (P. R. C. ) (other than Hong Kong S. A. R) Switzerland U. K. P/N 36L8868 75H8988 49P2101 75H8989 75H8992 75H8990 75H8993 75H8999 75H8998 75H8996 76H3536 02K0540 75H8997 75H8994 CRU ID * 262 R50e, R51e and R52 Series Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. [. . . ]