User manual STANTON C.500

[. . . ] USER MANUAL PROFESSIONAL DUAL CD PLAYER IMPORTANT TO SAFETY IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] CAUTION: The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly. 15° Main unit The control panel's LCDs are designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range. 45° 5° Controlpanel Button . Figure 1 Figure 2 Connections 1) Turn off the POWER switch. 3) Connect the control cords to the REMOTE connector on the main unit. Otherwise the units may not work properly. NAMES AND FUNCTIONS Main Unit Front Panel (1) POWER (Power ON/OFF Switch) When the POWER switch is pressed, the power turns on. The disc holder cannot be opened during playback, so stop playback before pressing the button. (4) REMOTE CONTROL CONNECTOR Connect this connector to the control unit using the included control cord. (5) AUDIO OUT The audio signals from each player are output from these jacks. Connect the output to the respective digital input of a digital amplifier for example. 5 NAMES AND FUNCTIONS Control Unit (1) OPEN/CLOSE Press this button to open and close the disc holder. The disc holder cannot be opened during playback, so stop playback before pressing the button. (2) TIME (Time Button) Press this button to switch the time display among the elapsed time and remaining time and total remaining time of the disc. (3) LCD (4) REPEAT more to resume playback. (10) SGL/CTN (Single/Continuous Button) (5) (6) (7) (8) (9) To place the unit into REPEAT mode press this button. Once the unit is in REPEAT mode the current track will play until the button is pressed again. PITCH LOCK Use these button to enable or disable BPM adjustment with the pitch sliders. BPM adjustment with the pitch sliders is disabled when the PITCH LED lights. Loading discs Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button again to close the disc holder. The unit will show the total track number and the total playing time for about 2 seconds then enter the cue condition, the cue point will be set to the music starting point of the first track automatically. Figure 2-1 CAUTION: Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time. Do not push the disc holder in manually when the power is off, as this may result in malfunction and damages the player. 3. Selecting Tracks Press the SKIP button once to move to next higher or lower track. When a new track is selected during playback, playback begins as soon as the skip search operation is completed. If the skip button is pressed while at the last track, the first track is selected. [. . . ] CAUTION: Do not forcibly close the disc holder when the power is off. POWER OFF POWER OFF Do not switch off the power when the disc holder is open. Switch off the power after the disc holder has been closed with the OPEN/CLOSE button. COMPACT DISCS 1. Precautions on handling compact discs Do not allow fingerprints, oil or dust to get on the surface of the disc. Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs. Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its case or returning it. [. . . ]