User manual STANTON DJLAB.3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STANTON DJLAB.3. We hope that this STANTON DJLAB.3 user guide will be useful to you.


STANTON DJLAB.3 : Download the complete user guide (6673 Ko)

Manual abstract: user guide STANTON DJLAB.3

Detailed instructions for use are in the User's Guide.

[. . . ] This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus. 9. 10. 11. IMPORTANT SAFETY INSTRUCTIONS CAUTION CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the use to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. LINE VOLTAGE SELECTION 115V The desired voltage of your turntable may be set with the VOLTAGE SELECTOR switch on the rear panel of the main unit, using a screwdriver. 2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage. 230V 3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman. [. . . ] Note*** Remember to turn ALL volume levels down when turning the unit on/off. 3) Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for good sound. 5) Replaceable Crossfader - Achieves clean fades between the two input channels. Use the crossfader for fast and seamless fades from one channel to the other. 6) Mic Input Gain ­ Adjusts microphone input level. 7) Mic Input ­ Insert your Microphone with ¼" plug here. 8) Headphone Output ­ Insert in the ¼" plug for your headphones here. 9) Channel Cue / Cue Pan - Used to preview channel audio to your headphones. Listen here before bringing up channel faders or moving the crossfader. 12) Crossfader Curve ­ The CUT setting allows the use of the crossfader for quick cut in and out when scratching and mixing. The FADE setting is used for longer segues, typically when mixing between two beat-matched sources. 13) Fader start ­ This function works in conjunction with a compatible fader start CD player. QUICK SETUP DIAGRAM Study this setup diagram. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices. SPECIFICATIONS M. 202 INPUT / OUTPUT IMPEDANCE & SENSITIVITY: LINE -14dB/10K OHM ±2dB PHONO -50dB /47K OHM ±2dB MIC -60dB /2. 2K OHM ±2dB MASTER 1K OHM PHONES 0dB/33 OHM ±2dB (LOAD=32 OHM) MAX. OUTPUT (THD=1%) MASTER MORE THAN +14dBV PHONES MORE THAN +21dBV CHANNEL BALANCE WITHIN 3dB FREQUENCY RESPONSE: LINE 20-20KHz ±2dB PHONO 20-20KHz +2, -3dB (RIAA) MIC 20-20KHz +2/-3dB OUTPUT NOISE (IEC-A WEIGHTED) LINE LESS THAN -90dBV PHONO LESS THAN -80dBV MIC LESS THAN -50dBV THD + N: LINE PHONO MIC PHONES (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF) LESS THAN 0. 05% 20 - 20KHz LESS THAN 0. 1% 20 - 20KHz (IEC-A WTD) LESS THAN 0. 2% 20 - 20KHz (IEC-A WTD) LESS THAN 0. 1% 20 - 20KHz (FROM LINE INPUT) LESS THAN -80dB AT 1KHz BETWEEN CHANNELS. (TERMINATED UNUSED INPUTS) CROSSTALK MIC EQ HI LOW ±10 +/- 2dB AT 10KHz ±10 +/- 2dB AT 100Hz CHANNEL EQ HI 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz MID 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz LOW 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz POWER SOURCE DIMENSIONS WEIGHT AC 9V, 1000mA 230 (W) X 267 (D) X 111 (H) mm 1. 65Kgs CONNECTIONS 1) Connect the power cord to an AC outlet. You can also use a line input by setting the phono/line switch at the rear of the turntable to Line. For access to the Key Lock feature use the Line output or S/P DIF output. T. 80 TURNTABLE CONTENTS T. 80 TURNTABLE CONTENTS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Start/Stop Strobe Dots Slipmat Center Spindle Motor ON/OFF Switch Platter Revolution Speeds (RPM) Target Light Base Key Lock Pitch Lock Pitch Slider Headshell Locking Nut 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) Tonearm Pitch Select Tone Arm Base Counterweight 45-rpm Adaptor Holder Extra Stylus Holder Reverse Phono/Line Output Phono/Line Switch Digital Output Power Cord Connector/Power Switch TONE ARM AND CARTRIDGE SETTINGS The major cause of problems in sound and skipping on the vinyl is the lack of proper set up of the needle and turntable adjustments. The T. 80 has several adjustments to correctly position the needle to the vinyl. Your cartridge is to be mounted into the headshell as pre the mounting instructions included with the cartridge. The Stanton 500, 680 and 890 series of cartridges require the use of the two screws mounting into the headshell. For your convenience, some of these products can be purchased already mounted and pre-adjusted from your local Stanton dealer. If you are using these 1/2" mounted products with a headshell in a mobile application or you are doing heavy scratching, May want to use an extra shell weight. [. . . ] Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE STANTON DJLAB.3




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STANTON DJLAB.3 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.