User manual STANTON M.207
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STANTON M.207. We hope that this STANTON M.207 user guide will be useful to you.
Manual abstract: user guide STANTON M.207
Detailed instructions for use are in the User's Guide.
[. . . ] M. 207
2-Channel Scratch Mixer with Effects
User Manual
Important Safety Instructions
1. Read Instructions All the safety and operating instructions should be read before this product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Channel Fader 1 will control the level of Input 2, and Channel Fader 2 will control the level of Input 1.
8
M. 207 Effects
4. 2 M. 207 Effects
In this section of the manual, we will show you how to use the main M. 207 effects from the Auto Filter to the Transform effect. 4. 2. 1 The FXglideTM Area
This is the main control for the effects in the M. 207 and it is separated into 3 components the Slider Strip (A), the Button Strip (B), and the LED Strip (C). (Figure 4. 2)
Figure 4. 2
4. 2. 1. 1 The Slider Strip The Slider Strip (A) is like a virtual fader that moves up and down with your finger and it is used to change a parameter that is a continuous range of values (like 1-100, or 20 Hz to 20 kHz). The Slider Strip is absolute, meaning that if a range from 0-100 is being controlled, 0 is always the bottom and 100 is always the top. Touching a specific point on the slider results in a specific value being generated. 4. 2. 1. 2 The Button Strip The Button Strip (B) is a vertically aligned row of 5 buttons. These buttons have different uses depending on which effect is selected, but in all cases, the values go from top (greatest) to bottom (least). Buttons are generally used to choose things like beat divisions (4/1, 2/1, 1/1, ½ for instance), or to trigger samples. 4. 2. 1. 3 The LED Strip The LED Strip (C) is a column of LEDs that gives visual feedback on the different FXGlideTM functions and effects parameters. For instance, with the PHASER effect selected, it will tell you which beat division is currently selected. If automation is active, it will give you a visual representation of that particular automation. The LED Strip it is not touch sensitive.
9
Effects
4. 3 Effects
There can be 2 effects per button. One effect is located at the top and the other at the bottom of the button. For example, A. Filter/M. Filter, Phaser/Flanger, etc.
Pressing the button once triggers the top effect (the button lights up solid). (Figure 4. 3)
Figure 4. 3
Pressing and holding the button engages the bottom effect (the button will blink to indicate that the lower effect is engaged). (Figure 4. 4)
Figure 4. 4
To send an effect to a channel, the CHANNEL FX button must be pressed on that channel. (Figure 4. 5)
Figure 4. 5
An FX button will light up red to let you know that it is active. Having the FX button engaged on a channel will allow you to cue the effects on that channel, but will not send the effect to the master output unless you press the FX ENGAGE button (it will blink blue to let you know it is active). (Figure 4. 6) Now let's look at the effects!
Figure 4. 6
10
Automatic and Manual Filter
4. 3. 1 Automatic and Manual Filter (A. FILTER/M. FILTER)
A. Filter (Figure 4. 7)
Figure 4. 7
Auto Filter is a sweeping filter that moves based on the BPM. The FXGlideTM Button Strip gives you 5 different sweep lengths, from 16 beats (16/1) to 1 beat (1/1). Pressing WET/DRY will give you control over the ratio of effect audio to "normal" audio. Pressing the PARAM button will give you control over the amount of resonance in the Auto Filter. [. . . ] For purposes of purchases made via the Internet, the merchandise must be returned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty. To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized Stanton dealer's return policy. Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STANTON M.207
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STANTON M.207 will begin.