User manual STANTON S-500

[. . . ] USER MANUAL IMPORTANT TO SAFETY IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] (2) TIME (Time Button) Press this button to switch the time display between the elapsed time and remaining time and total remain time. The selected mode is indicated by the ELAPSED and REMAIN and TOTAL REMAIN indicator on the LCD. (3) LCD (4) LOOP (Loop Button) Press the LOOP button to set the loop start point, press the LOOP button again to set the loop end point. (7) PITCH (Pitch Button) Use these button to enable or disable BPM adjustment with the pitch sliders. BPM adjustment with the pitch sliders is enabled when the PITCH LED lights. Press once to start playback, once again to set the pause mode, and once more to resume playback. (10) SGL/CTN (Single/Continuous Button) Press it to switch between the single and continuous play modes. (11) CUE (Cue Button) Press the CUE button during playback to return to the position at which playback started. Press the PROGRAM button, the player will enter the program mode and stop the CD playback. SKIP Use these button to go back to the beginning of the current track or select a previous track for playing. (14) , (15)SEARCH/SCAN Press these buttons to perform frame search function during pause mode or to perform scan function during play mode. (17) PITCH (Pitch Indicator) Moving the pitch slider will change the pitch only when the pitch LED is illuminated. (18) REALY By pressing the RELAY button, the playback automatically switches to the other player after every track. Do not push the disc holder in manually when the power is off, as this may result in malfunction and damage the player. 3. Selecting Tracks l l l l Press the SKIP button once to move to one higher or lower track. When a new track is selected during playback, playback begins as soon as the skip search operation is completed. button is pressed while at the last track, the first track is selected. In the same way, if the skip If the skip button is pressed while at the first track, the last track is selected. 4. Starting Playback l l Press the PLAY/PAUSE button during the pause or cue condition to start playback, the PLAY indicator lights. The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns to the cue point when the CUE button is pressed . (Back Cue) Figure 4-1 5. Press the CUE button during playback to return to the cue point and enter pause condition. (Back Cue) CUE Figure 5-1 8 OPERATIONS 6. [. . . ] Loop Play OE · Z Press the LOOP button to set the loop start point A, the LOOP indicator will flashes on the LCD. Press the LOOP button again to set the loop end point B, after the B point is set, the playback will enter the loop play from A to B repeatedly. Press the LOOP button again, the loop play function is canceled, the LOOP indicator goes out. 14. Faderstart With the S-500, you have the possibility to start the respective CD-player direcatly from the mixer. [. . . ]