User manual STANTON S-700
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STANTON S-700. We hope that this STANTON S-700 user guide will be useful to you.
Manual abstract: user guide STANTON S-700
Detailed instructions for use are in the User's Guide.
[. . . ] REVERSE R E W IN D
N OR M A L FOR W A R D
REVERSE R E W IN D
N OR M A L FOR W A R D
PLAY
PAUSE
PLAY
PAUSE
MOTOR OFF
BRAKE
MOTOR OFF
BRAKE
IMPORTANT TO SAFETY
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] To set a new frame cue point, spin the wheel then press PLAY when you have determined the proper position. The JOG wheel can temporarily bend the pitch of the music up to +/-16% if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. CUE - Pressing the CUE button during play provides a return to the position at which play was started. If pause is used before CUE or CUE point was set, that will become the cue point. SEAMLESS CUE (SQ) - This button is used to go back to the selected cue point without interuption in playback.
LCD DISPLAY
1 234 5 67 8 9
OPERATING INSTRUCTIONS
1. OPENING AND CLOSING the Disc Tray and Loading Discs a)Opening and closing the disc tray This operation only works when the power is on. OPEN/CLOSE button(8) are provided on both the main unit and control unit. If tray is not closed after 60 seconds it will close automatically and pause. The disc trays cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. 4.
12 13 14
15
16 17 18
PLAY lit while the unit is playing a CD. CUE MEMORY CALENDAR - The numeral on the cue memory calendar shows to indicate which cue memory is set previously. When this is not lit the CD will play continuously through all tracks. ELAPSED, TOTAL REMAIN - These indicate that the time shown on the display is the ELAPSED, TOTAL REMAINING or single song remaining time. LOOP - Lit when the CD is repeating a particular area with the music on the CD. RELOOP Lit when the CD has had a loop set previously and can go back to loop again.
5. TRACK, MINUTE, SECOND, FRAME These displays indicate information on the current track and time 15. PITCH/BPM Shows either the percentage change in pitch or the BPM of the song depending on the mode selected with the BPM BUTTON. ANTI SHOCK AND BUFFER INDICATOR The memory status is represented on the display by a bucket being filled or emptied. The bucket itself represents the instant start function (which works by buffer ). Each bar within the bucket represents 5 seconds of anti shock protection. Loading discs Hold the disc by the edges and place it in the disc tray. CAUTION: Do not play foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time. [. . . ] When "A" is in standby mode at cue point, move the CROSS FADER slider from right to left to automatically starting playback instantly. The player's fader start operation can also be used to produce cross-fader effect. When "B" is in standby mode at cue point, move the CROSS FADER slider from left to right to automatically start playback on "B". ("A" will simultaneously be back cued (returns to cue point)). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STANTON S-700
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STANTON S-700 will begin.