User manual STRONG 8105

[. . . ] DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: „„ direct sunlight or any other equipment that generates heat; to rain or intense To moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers,  etc. „„ When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket. „„Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, and only after disconnecting from the mains voltage supply. [. . . ] Select Yes and press OK again to stop the recording. *Please connect a USB storage device with sufficient free space before you start a recording. 7. 0 Main Menu The main menu gives you access to settings, multimedia functions and built in games. The main menu consists of the following sub menus: Edit Channel, Installation, System Setup, Tools, Game and Media+. Throughout the main menu, MENU or EXIT can be used to get back to the previous screen. 7. 1 Edit Channel Use pq to select Edit Channel and press OK or u to enter. Press EXIT or t to get back to the main menu. 9 English PART 1 • English In Edit Channel menu select TV Channel List with pq and press OK to enter. Use tu to change the channel group (assumed you have already set up favourite groups). Press OK to view the selected channel in the preview box. 7. 1. 1 TV Channel List 7. 1. 2 Adding channels to favourite lists Channels from the TV Channel List can be added to up to 8 different favourite groups. The FAV sign on the top of the screen will move up to indicate that the favourite function is selected. Use pq to select the favourite list you wish to add the channel to and press OK, press EXIT to finalize the process. Select Yes to save the changes or No to discard. 7. 1. 3 Locking channels Locked channels can only be watched after entering the pin code. (DEFAULT PIN: 0000) To lock or unlock a channel, press RED while in TV Channel List. The red Lock sign on the top of the screen will move up to indicate that the Lock function is selected. 11 English PART 1 • English 7. 2. 2 Channel Scan Use pq to select Installation, press OK or u to advance. Use tu to toggle between available scan modes: By Channel and By Frequency. If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency is selected, use the cursor buttons to select Frequency and Bandwidth. Newly found channels will be stored in the channel list. 7. 2. 3 Aerial Adjustment Use pq to select Installation, press OK or u to advance. Use pq move the highlight to the setting you wish to alter and use tu to change values. The following settings are available: Antenna Power:  to On if you use an active antenna. When set to On, 5 V will be present on Set the ANT IN connector of the receiver. Channel No. :  Select a channel that is known to carry a broadcast in your region. The Signal Strength and Signal Quality bars give a visual indication of the reception. Adjust your antenna to obtain maximum signal strength and quality. [. . . ] Select Media Player from the Media+ menu and press OK to proceed. The help banner at the bottom of the screen explains all buttons used in the Media player. Note:  can also access the Media Player from viewing mode with the FILE key on You the remote control. The Record Manager gives you access to previously recorded events. Select Record Manager from the Media+ menu and press OK to enter. [. . . ]