User manual STRONG PRIMA IV

[. . . ] Digital Terrestrial Receiver PRIMA IV User Manual Bedienungsanleitung Manuel d'utilisateur Istruzioni d'uso Manual de usuario Návod k obsluze Picture similar PART 1 · English TABLE OF CONTENTS 1. 0 INSTRUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 CONNECTION 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to VCR 2. 3 Connecting to a Digital Audio Amplifier 3. 0 YOUR RECEIVER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 4. 0 FIRST TIME INSTALLATION 5. 0 MAIN MENU 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TROUBLESHOOTING A. 2 SPECIFICATIONS 2 2 3 3 3 4 4 4 4 4 4 4 5 5 5 5 7 7 8 9 9 10 10 10 11 1 English PART 1 · English 1. 0 INSTRUCTION 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Read All Instructions - Before you use the product, read all operation instructions, For more information on accessories such as the lithium ion battery, refer to the manuals provided with those products. Save These Instructions- Save all safety and operating instructions for future reference. [. . . ] In Channel submenu select TV Channel List with the pq buttons and press OK to enter. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). With OK you can watch the selected channel in full screen mode. 5. 1. 1. 1 Edit Use this menu to favour, lock, skip, delete and rename channel list. With the pq buttons highlight a channel and press OK to select or press [0] to select all channels. n Favor: To add selected channel or all channels to a favourite group, press [1]. n Lock: To Lock channel or all channels press [2], with tu select Yes in the confirmation window and press OK to save. n Skip: To Skip channel or all channels press [3], with tu select Yes in the confirmation window and press OK to save. At the appearing Keyboard use the pqtu buttons to highlight desired letters or numbers and press OK to insert. After you entered desired group name, highlight OK at the keyboard to confirm. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. (All = Free-To-Air and scrambled channels/Free = only Free-To-Air channels) 1. Use the pq buttons to select Installation, press OK to enter the menu. Use the pq buttons to select Channel Scan and press OK to enter the menu. Use the tu buttons to select one of two Scan Modes ­ By Channel and By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. 5. 2. 2 Channel Scan 5. 2. 3 Antenna Setting 1. Use the pq buttons to select Installation, press OK to enter the menu. If On is selected, the receiver will provide 5 V antenna power (for active antennas). Press EXIT to exit. 5. 2. 4 LCN Mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. Note: LCN Mode is automatically set by selecting the region during first installation. [. . . ] Enter "Tools" menu, select "Software Upgrade" and press OK, Software Upgrade menu is shown. Press pq buttons to select "Upgrade by RS-232" or "Upgrade by Air" item and press OK, you are asked to input password (default password is 0000). "Upgrade by RS-232" allows you to make copy from receiver to receiver with a specially wired SCART cable. Select "Upgrade by Air" to check if there is an upgrade available and to load software directly from broadcaster over the air into the receiver. [. . . ]