User manual STRONG SRT 5001 ECO

[. . . ] Digital Terrestrial Receiver SRT 5001 ECO User manual Picture similar PART 1 · English TAblE Of COnTEnTS 1. 0 InSTRUCTIOn 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 COnnECTIOn 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 YOUR RECEIvER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default password: 0000 4. 0 fIRST TImE InSTAllATIOn 5. 0 mAIn mEnU 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATIOn 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TROUblEShOOTIng A. 2 SPECIfICATIOnS 2 2 4 4 4 6 6 6 6 6 6 6 7 7 7 7 10 10 12 14 15 15 15 15 16 17 English * 0, 12/Min. from mobile network 1 PART 1 · English 1. 0 InSTRUCTIOn 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Read All Instructions - Before you use the product, read all operation instructions, For more information on accessories such as the lithium ion battery, refer to the manuals provided with those products. [. . . ] The only difference is that in Radio Channel List there is no video information, so it will always display the radio logo at the right preview screen. 5. 1. 3 Delete all favourites and groups Use this menu to delete all favourite channels. Select Delete All Favourites with the pq and press OK, with tu select Yes in the confirmation window and press OK to delete or select No to cancel. 5. 1. 4 Delete all Use this menu to delete all channels. Select Delete All with the pq and press OK, then enter the Password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 group Rename In this menu you can change favourite group name. At the appearing Keyboard use the pqtu buttons to highlight desired letters or numbers and press OK to insert. After you entered desired group name, highlight OK at the keyboard to confirm 3. Press EXIT button to cancel the group rename. 9 PART 1 · English 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the pq buttons to select Installation, press OK button to enter menu. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. Use the pq buttons to select Installation, press OK to enter the menu. With the pq buttons to select Channel Scan and press OK to enter the menu. Use the tu buttons to select one of two Scan Modes ­ By Channel and By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. Use the pq buttons to select Installation, press OK to enter the menu. If On is selected, the receiver will provide 5 V antenna power (for active antennas). 4. 5. 2. 2 Channel Scan 5. 2. 3 Antenna Setting 5. 2. 4 lCn mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/ deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. Press pq buttons to highlight desired menu and press OK button to enter the setting menus. You can get 10 PART 1 · English better overview if press OK first. [. . . ] For further details visit our website www. strong. tv or contact your local Serviceline. 1. Press pq buttons to highlight desired menu and press OK button to enter. Description for usage of buttons will be displayed on screen. 5. 5 media+ 5. 5. 1 media Player This function allows you to play MPEG-2 (supports not all recording formats), Audio and Photo files from connected USB device 1. In "Media+" menu, select "Media Player" and press OK button to enter Media Player menu. [. . . ]