User manual STRONG SRT 56

[. . . ] Digital Terrestrial Receiver SRT 56 User manual Bedienungsanleitung Manuel d'Utilisateur Manuale Utente Manual del usuario Prirucnik za upotrebu Návod k obsluze Picture similar PART 1 · English TAblE of ConTEnTs 1. 0 InsTRuCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 ConnECTIon 2. 1 Default Pin-Code: 0000 3. 0 YouR RECEIvER 3. 1 Remote Control 4. 0 fIRsT TImE InsTAllATIon 5. 0 mAIn mEnu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 oPERATIon 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TRoublEshooTIng A. 2 sPECIfICATIons 2 2 3 3 4 4 5 5 5 5 6 6 6 8 9 11 12 15 15 15 15 16 17 English Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line per March 2010 sTRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC Rohs 2002/95EEC * 0, 14/Min. [. . . ] Use the pq buttons to select Installation, press oK button to enter menu. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press oK to start auto scan. Use the pq buttons to select Installation, press oK to enter the menu. With the pq buttons to select Channel Scan and press oK to enter the menu. Use the tu buttons to select one of two Scan Modes ­ By Channel and By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Switch Network Search to ON or OFF, highlight Search and press oK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5. 2. 2 Channel scan 8 PART 1 · English 5. 2. 3 Antenna setting 1. Use the pq buttons to select Installation, press oK to enter the menu. If On is selected, the receiver will provide 5 V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 4 logical channel numbering If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the Local Channel Numbering to On or Off. 5. 3 setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting, Parental Lock, and Auto Standby function. Press pq buttons to highlight desired menu and press oK button to enter the setting menus. Now you can select desired setting by pq buttons and confirm it with oK. Press EXIT button to exit. 5. 3. 1 osD language 5. 3. 2 Tv system This menu allows you to set OSD Language. Display Mode: PAL/NTSC/AUTO Aspect Ratio: Use this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen) and AUTO Video Output: Switch the video output mode either to RGB or to CVBS 5. 3. 3 Region and Time Here you can set your region and time zone. The options are: Off / User Define / By Region GMT Offset: This menu is valid only when User Define is selected at GMT Usage. The GMT offset range is "-11:30 ~ +12:00", with half hour steps. Date/Time: "Date" and "Time" menus are valid only when Off is selected at GMT Usage. 9 English PART 1 · English Time Display: This menu allow to control whether the time is displayed on screen or not. The options are: Off/On. In this menu you can set a programme timer or sleep timer. [. . . ] manual scheduling If you want to set a record manually you can set recording through the Timer menu. note: In case the available free space on the USB storage device is not enough, recording operation of broadcast will stop. Available Timeshift settings: 10/20/30/40/50/60 min, the maximum time is 1h Available Record Type: TS/PS. 20 MB free space on the USB storage device and an accurate Timeshift function is depending on the speed of the used USB storage device. 5. 5. 5 safely Remove storage Device In "Media+" menu, select "Safely Remove Storage Device" and press oK button to safely remove the USB device. [. . . ]