User manual STRONG SRT 6201

[. . . ] Digital Satellite Receiver SRT 6201 User Manual Picture similar PART 1 · English TAblE of ConTEnTS 1. 0 InTRoDUCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 YoUR RECEIvER 2. 1 Rear Panel 2. 2 Remote Control Unit 2. 3 Default PIN code: 0000 3. 0 ConnECTIonS 3. 1 Basic connection with SCART cable 3. 2 Connecting to Satellite Dish 3. 3 Connecting USB device 4. 0 STARTIng UP 4. 1 Language Selection 4. 2 Select Satellite 4. 3 Antenna mode 5. 0 MAIn MEnU 5. 1 Channel Organiser 5. 2 Installation 5. 3 System setting 5. 4 Timer 5. 5 Multimedia 6. 0 WATChIng Tv AnD lISTEnIng To ThE RADIo 6. 1 Program Information 6. 2 EPG (Electronic Program Guide) 6. 3 Changing channel list mode between TV, Radio and Favourite 6. 4 Selection Audio Language 6. 5 Teletext function 6. 6 Subtitles function A. 1 TRoUblEShooTIng A. 2 SPECIfICATIonS 2 2 2 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 6 6 6 7 10 10 11 11 11 11 12 12 12 12 13 STRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RohS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line 1 English PART 1 · English 1. 0 InTRoDUCTIon 1. 1 Safety Instructions Do noT InSTAll YoUR RECEIvER: n a closed or poorly ventilated cabinet; directly on top of or under any other equipment; In on a surface which might obstruct the ventilation slots. [. . . ] Use pq to move the channel to its new location and press oK to confirm. Press pq to focus on channel, press tu to point the focus to column "Del" and press oK to mark the channel to be deleted. Press EXIT and confirm the channel's deletion by selecting oK and pressing oK. You will be asked to confirm operation. Move channel Delete channel Delete all channels 5. 1. 2 favourites Manager Press pq to select the channel and tu to point the focus to the favourite group. Edit Transponder: Press YElloW, the Edit Transponder sub-menu will appear. Press tu to select oK, press oK to confirm. 5. 3 System setting You can configure the system, such as Language Setting, OSD Style, Parental Control, TV Settings and Time Setting. 7 English PART 1 · English 5. 3. 1 Preference 5. 3. 1. 1 language Setting You can change the language of the OSD, preferred audio and subtitles. Use pq to select the OSD language, Audio language or Subtitles language. Press oK or u to enter the language list and press pq to select the language. Press oK to confirm. 5. 3. 1. 2 Tv settings You can set the TV mode, Screen mode and Video output settings. . Use tu to change the settings and press oK to confirm or EXIT to cancel the settings. 5. 3. 1. 3 Time Settings If a broadcaster provides GMT, you can set the time using GMT or set the time manually. To set the time value manually, move the cursor to the time item and use the numeric buttons on the remote control. 5. 3. 1. 4 Auto Standby This option allows you to set the desired Auto Standby time or to disable Auto Standby. Auto Standby will switch the receiver to standby automatically when it doesn't receive commands from the remote control for a given period of time. To avoid the automatic switch off, set Auto Standby to Disable. 5. 3. 1. 5 Set factory Default Please be careful when using this function, as it will erase all the data and parameters you may have set earlier. Once you set the factory default you will have to re-install your preferences and re-scan channels. To reset your receiver to factory default, apply the following steps: Select Set Factory default and press oK. The receiver will return to its factory default state and all user data will be deleted. note: IYour PIN code will change back to the factory setting "0000". 5. 3. 2 oSD Style You can set the Menu Colour, Transparency Level and Border Pattern. 5. 3. 3 Parental Control You can set Channel lock status (ON or OFF), the Menu lock status, Parental setting and Change PIN code. 8 PART 1 · English Channel Lock Set the system channel lock to ON or OFF. If lock is ON, the parental PIN code needs to be entered to watch the locked channel. Menu Lock Press oK to select whether the menu should be locked or not (YES or NO), press oK to confirm. If the menu lock is ON, you need to enter the PIN for some operations such as search program and set factory default. Parental Setting If a channel is locked, the parental PIN code needs to be entered to watch the locked channel. [. . . ] To set up a timer event: Press pq to move the cursor to the program for which you want to add a timer. To quit event timer setup, press EXIT. 6. 3 Changing channel list mode between Tv, Radio and favourite To change between TV and radio channel lists use TV/R in normal operation mode or in channel list mode. To change channel list to favourite in normal operation mode, press fAv. Then select channel of your choice and press oK to switch to full screen mode. [. . . ]