User manual STRONG SRT 6500

[. . . ] Digital Cryptoworks Embedded Satellite Receiver SRT 6500 User Manual PART 1 l English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Overview 1. 2 Main Features 2. 0 SAFETY / PRECAUTIONS 2. 1 Safety 2. 2 Precautions 3. 0 4. 0 ACCESSORIES CONTROLS / FUNCTIONS 4. 1 Front Panel 4. 2 Rear Panel 4. 3 Remote Control Handset 5. 0 USING THE REMOTE CONTROL 5. 1 Batteries 5. 2 Range Of Operation 6. 0 CONNECTING THE RECEIVER 6. 1 To a TV set, using TV SCART connection 6. 2 To a Hi-Fi system and a TV set, using both A/V connections 6. 3 To a VCR and a TV set, using both SCART connections 7. 0 8. 0 STARTING UP FOR THE FIRST TIME SETUP AND OPERATION 8. 1 Before Setup 8. 2 Setup Menu 8. 3 Main Menu Settings 8. 4 General Viewing Information A. 1 A. 2 PROBLEM SOLVING SPECIFICATIONS 2 2 2 3 3 3 4 4 4 5 6 7 7 7 8 8 8 9 10 11 11 11 18 23 28 29 English 1 PART 1 l English 1. 0 INTRODUCTION 1. 1 Overview This satellite receiver was designed for Digital satellite receiver with Cryptroworks embedded. It enables you to tune in on the hundreds of digital television and radio channels broadcasting to your region, with the highest video, audio and data quality attainable with current technology. It performs numerous functions to provide you with a variety of services. 1. 2 Main Features n n n n n n n n n n n n n n n n n n n n n n n n n For all digital Free-To-Air TV and Radio programmes via satellite Embedded Smartcard reader for Cryptoworks smartcard Display showing channel number or time Separate power switch Digital sound through coaxial output (S/PDIF) Parental lock function for menu and selectable per channel Over 3 000 TV channel memory capacity and 1 000 radio channel memory capacity Pre-programmed with most popular channels 5 Favourite lists for TV-and Radio programme Quick and easy installation & user-friendly menu Excellent Audio & Video quality Teletext via VBI & OSD Supports DiSEqC 1. 0 and DiSEqC 1. 2 Electronic Programme Guide (EPG) for present/following event information and up to 7 days for on screen programme information Timer function (sleep, awake) Multi-lingual audio track support Multi-lingual support on screen menu (OSD): English, Hungarian, Czech, Slovak, Bulgarian, Turkish, German Edit function for TV and Radio programme name, Favourite Group name, and Transponder information Future-proof: Software update via satellite (OTA) Signal strength bar for digital transponders Automatic and manual channel scan options Power on with last viewed channel User-friendly remote control (Infrared up to 7 meters) Low power consumption PAL / SECAM / NTSC compatible 2 PART 1 l English 2. 0 SAFETY / PRECAUTIONS English 3 2. 1 Safety n Be sure to read this manual before you start operating the unit Do not touch the power cord with wet hands, as that may cause electric shock Never open the cover. It is very dangerous to touch the inside of the unit, due to possible electric shock The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus n n n n Place the unit in an adequately ventilated and cool environment When not in use for a long time, it is recommended that the power cord be disconnected from the mains. [. . . ] "TP ­ NIT" ­ receiver will search channels from one transponder and in addition use network information. This mode recommended if you want to search channels of particular broadcaster only Sub options are: "Free" ­ receiver will search only Free To Air channels "Free+Scr" ­ receiver will search for all channels Transponder: Select index from the stored list Frequency: Polarity: FEC: Function: AGC Signal: Value of transponder frequency in MHz Horizontal / Vertical / Right / Left Auto, 1/2, 2/3, 3/4, 5/6, 7/8 Append / Delete / Change Indicates received signal strength level Symbol Rate: Value of symbol rate in kSymbols Per Second 8. 2. 3. 1 How to search for channels Highlight "Tune method" field and press OK. Names of the found channels will be shown in the two columns: for TV and Radio separately. If you press OK button: search process will be interrupted and you can select one of the following options: n n Save ­ to save all found channels Unselect ­ to unselect some unwanted channels from the list. Use OK button to unselect channels and Vol t/u buttons to switch between TV and Radio list. Once you finish ­ press EXIT button, select "Save" and press OK. Only selected channels will be stored in the memory n Cancel ­ to cancel result of search. No channels will be stored in the memory If you press EXIT button: search process will be interrupted and no channels stored in the memory. PART 1 l English 8. 2. 3. 2 How to add new transponder Set "Tune method" to "TP" or "TP+NIT" Move focus to "Frequency" and enter value in MHz n Move focus to "Symbol rate" and enter value in kSPS n Move focus to "Polarity" and select value n Move focus to "FEC" and select value or set "Auto" n Move focus to "Function" select "Append" and press OK. New transponder will be added to the end of the list n n 8. 2. 3. 3 How to delete present transponder Set "Tune method" to "TP" or "TP+NIT" Move focus to "Transponder" and choose transponder you want to delete n Move focus to "Function" select "Delete" and press OK. Selected transponder deleted from the list n n 8. 2. 3. 4 How to correct/edit parameters of the transponder Set "Tune method" to "TP" or "TP+NIT" Move focus to "Transponder" and choose transponder you want to modify n Move focus to "Frequency" and enter value in MHz n Move focus to "Symbol rate" and enter value in kSPS n Move focus to "Polarity" and select value n Move focus to "FEC" and select value or set "Auto" n Move focus to "Function" select "Change" and press OK. Modified data are stored in the memory n n n Press EXIT to go back to the previous mode 8. 2. 4 Setup Lock/PIN Press OK on `Setup Lock/PIN' in the Setup Menu. Set the Menu Lock, Change the PIN, enter the New PIN and confirm the Confirm PIN. n n Use CH p/q to move up and down the list Use Vol t/u to change the setting Menu Lock: Change PIN: New PIN: Confirm PIN: On/Off Press OK if you want to change. Enter your new 4-digit code Confirm your new 4-digit code Note: The default PIN is `1234' n Press EXIT to go back to the previous mode 16 PART 1 l English 8. 2. 5 Time Setting the Timer. n n Use CH p/q to move up and down the list Use Vol t/u to change the setting Local Time: Sleep Time: Timer: Status: If you want to correct time and date then enter in format dd/mm/yyyy - day ­ hh:mm 0 ~ 180 min. Receiver will be turned off after selected time interval Select timer number Disabled/Enabled. If Enabled ­ receiver will be turned on within selected channels at defined "start time" and turned off after "duration" interval Channel type: Channel number: TV/Radio Enter channel number. If you use multi satellite installation ­ make sure to enter channel number in "All satellites" mode Channel name: Start time: Duration: Displayed automatically and depends from channel number Enter start time in format dd/mm/yyyy - day ­ hh:mm Enter duration in hh:mm format NOTE: Timer also can be programmed from EPG. See "Program Guide" chapter of this manual. n Press OK to store settings and go back to the previous mode 8. 2. 6 Factory Default Press OK on `Factory Set' in the Setup Menu. This function will return all settings of the receiver to factory default. All your channels, favourite lists and settings will be cleared from the memory. 17 English Press OK on `Time Setting' in the Setup Menu. Set the Local Time, Sleep Time, Timer Status and Program PART 1 l English 8. 3 Main Menu Settings From the Main Menu you can access to the Program Guide, Channel Sorting, Language Preference Settings, Favorites Editing, Channel Editing, Smart card information and Software Version information. n n n n n Press MENU Use CH p/q to move up and down the list Use Vol t/u to change the setting Upon reaching the required menu line, press OK to enter the setting Press EXIT to go back to the previous mode 18 PART 1 l English 8. 3. 1 Program Guide English 19 This menu displays same information as described in chapter 8. 4. 4. Press OK on `Program Guide' in the Main Menu. 8. 3. 2 Sort Channels Press OK on `Sort Channels' in the Main Menu. The following window will appear. n n n n n Use Vol t/u to select an alphabetical letter Press OK to confirm your choice Use CH p/q to move up and down in the list Use Vol t/u to scroll pages Down or Up Pressing OK on the highlighted channel calls that channel and closes this menu Press EXIT twice to go back to the previous mode n 8. 3. 3 Language Press OK on the `Language Preference'. [. . . ] In case no new software is available you will get corresponded message. n Press EXIT to go back to the previous mode 22 PART 1 l English 8. 4 General Viewing Information English Clock 23 8. 4. 1 Program Information Information on the currently viewed program appears for a few seconds, when you press INFO. Favourite Scramble Lock Teletext Satellite Name Channel Name Channel Number Program Information PART 1 l English 8. 4. 2 TV/Radio Channels List While watching TV or listening to Radio you can call the channel list by pressing TV/RADIO or OK button. The picture in the preview screen is that of the highlighted channel, which can be changed with the CH p/q. Pressing OK on a highlighted channel calls that channel and exits the Channel List. To sort channels in various modes press EXIT while focus of the list is pointed to the channels. [. . . ]