User manual STRONG SRT 4121

[. . . ] English CONTENTS CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . POWER SOURCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . POWER CORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIQUIDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] And the user will be asked whether he would like to start scan or not?By pressing OK, all channels (predetermined in database) of that satellite will be searched and stored into receiver and channel table is updated. After search, if new channels are found, they are added to the channel table. 15 English 6. 4. 3. 2. PID Entry (for single channel search) Satellite Name, Polarisation values and Network Search requirements are changed by toggling. Video, Audio and PCR PIDs of the desired channel can be also entered by PID Search menu is selected. Every channel has its own PID values, so by entering PID values, only one channel can be find. By pressing OK, the values are stored and after searching if a new channel exists they are appended to the Channel Tables. Found channel name is shown as Pgm. When tuning in the screen there will be shown the satellite name and frequency, polarization, symbol rate of the current transponder under the found programs. As shown below there will also be displayed a progress bar which indicates the percentage of searched transponders. If include scrambled channels item selected as YES, scrambled channels will be also searched. FACTORY SETTINGS The user can use this item to load preset channel table and default settings, which had been loaded to receiver at the factory. Then a message is displayed to warn the user like Are you sure to DELETE ALL services and LOAD DEFAULT channel table?The user can confirm by OK key or abandon by MENU key (or by selecting NO). As soon as entering transponder frequency, changing appears in the signal strength bars (Signal Level and Signal Quality bars) at the bottom of the menu. Signal Quality bar shows lock quality of the device for entered values. If Network Search item selected as YES, the parameters of all transponders will be collected from NIT (Network Information Table) and the tuning will be performed. 16 English 6. 5. If the advanced menu is active, by selecting Basic Menu basic menu can be made active or vice versa. 6. 5. 1. The current menu language can be changed and updated by ö / ö keys. 6. 5. 2. AUDIO LANGUAGE By pressing ö / ö keys Audio Language option is highlighted. The current audio language can be changed and updated by ö / ö keys. When new channels are added, they are recorded with the default audio language in database. 6. 5. 3. SUBTITLE LANGUAGE By pressing ö / ö keys Subtitle Language option is highlighted. The current subtitle language can be changed and updated by ö / ö keys. [. . . ] The receiver has backup system software that can be restored in such cases. The restoring process is triggered when the STB is switched on afterwards. 29 English 7. TROUBLE SHOOTING GUIDE Trouble No picture or sound. Possible reasons No signal or weak signal. What to do Check the LNB and scart connectors and the dish installation. Before unplugging your digital set-top box, wait for going to standby. The settings you have done in the menus have not been changed. The digital set-top box was unplugged without first going to standby. The remote control is not working. The digital set-top box is in standby. [. . . ]