User manual STRONG SRT 4404

[. . . ] This receiver is of our latest development and it is designed to be capable of upgrading its software through the satellite and the Internet. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance. Content 1. Usage This user manual is applicable for Strong SRT 4404 Evolution Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. [. . . ] RF TV Mode: Press the Right button and set your TV mode to "PAL-BG", "PAL-I", "PAL-DK" or "NTSC". UHF: Press the Right button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. RGB/CVBS: Press the Right button and set the TV mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). Transparency: Press the Right button and select how transparent you want your OSD. Brightness: Press the Right button and select how you want the OSD to be. Contrast: Press the Right button and select how you want the contrast to be. Saturation: Press the Right button and select how saturated the screen to be. 27 28 · Parental Lock: This function changes the Personal Identification Number (PIN) that is used to control access to the menu and individual channels. In this function, you can lock/unlock channels and you can change your PIN code by applying the following steps: Menu: Using RIGHT / LEFT keys, you can select either "lock" or "unlock" and press OK. By selecting "lock", the receiver asks you to enter your PIN every time you want to access the menu. By selecting "unlock" it gives you the possibility to access the menu all the time without the receiver asking you for a PIN code. Current PIN: Enter `1111' New PIN: Enter a new PIN Retype PIN: Enter the same new PIN 1. 5. 1. 3 Installation Menu All settings that are related to TV, Dish, LNB and Satellites are within this menu. The installation menu contains "Antenna Setup", "Diseqc1. 2 Setup", "Manual Scan" sub-menus. To access the different sub menus, apply the following steps: It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC switch, your 0/12V switch and your Positioner before you start setting up your receiver. Antenna Setup Menu: To set up your antenna, please apply the following steps: 1. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT buttons to set up any values. · · · Antenna: Select an index for the satellite you wish to scan Satellite: Select the satellite you wish to scan from the satellite list. If you have different LNB type ­ select `0" and type the local oscillator value. In UNI1=9750/10600 MHz, UNI2=9750/10700MHz, UNI3=9750/10750 MHz 13/18V: Select auto, 13/18V, 13V or 18V for LNB. Select "Off" if you want to switch the power of the LNB to off. DISEqC: Select the type of DiSEqC you have or set it to "OFF" if you are not using a DiSEqC switch. [. . . ] If not : check if there is no snow on your dish Press the SAT button on the RCU and select the correct satellite Check settings in LNB- and Channel set up menu. Ask your dealer to check the outdoor unit and antenna cable to LNB Disconnect the 220V main power and ask your dealer to check the LNB cable. No sound No sound or picture The receiver displays the message ` No or Bad signal" during bad weather conditions (heavy rain or snow) The receiver displays the message ` No or Bad signal" The receiver displays the message ` No or Bad signal" The receiver displays the message ` No or Bad signal" The message "SAFE" is displayed on the front panel of your receiver The receiver or TV is in "MUTE"' mode Problem in scart cable connections between receiver and TV This is normal, the bad weather is interfering the signal between the satellite and your dish Wrong satellite selected in the menu. (Short circuit in the LNB cable) The batteries of the remote control are not inserted or exhausted. SC2005(LSI-LOGIC) 1Mbyte(up to 8Mbyte) 8Mbyte(up to 16Mbyte) 2Mbyte(up to 4Mbyte) 8Kbyte Digital Channel : 3000 Up to 64 3. MPEG Transport Stream & A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification Profile Level MPEG-2 MP@ML Input Rate Max 90Mbit/s Aspect Ratio 4:3, 16:9 Frame Rate 25Hz for PAL, 30Hz for NTSC Teletext Through VBI Audio Decoding MPEG/MUSICAM Layer I & II Audio Mode Single channel/Dual channel Joint Stereo/Stereo Frequency Response 20kHz~20kHz +/-2dB, 60kHz~18kHz +/-0. 5dB Sampling Rate 32, 44. 1, 48kHz 4. [. . . ]