User manual STRONG SRT 5001

[. . . ] Digital Terrestrial Receiver SRT 5001 User manual Picture similar PART 1 · English TABLE OF CONTENTS 1. 0 INSTRUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 CONNECTION 2. 1 Connecting to Terrestrial Antenna 2. 2 Connecting to TV and VCR 2. 3 Connecting to a Digital Audio Amplifier 3. 0 YOUR RECEIVER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 4. 0 FIRST TIME INSTALLATION 5. 0 MAIN MENU 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TROUBLESHOOTING A. 2 SPECIFICATIONS 2 2 4 4 4 6 6 6 6 6 6 6 6 7 7 7 9 10 12 13 14 14 14 15 15 16 English 1 PART 1 · English 1. 0 INSTRUCTION 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Read All Instructions - Before you use the product, read all operation instructions, For more information on accessories such as the lithium ion battery, refer to the manuals provided with those products. Save These Instructions- Save all safety and operating instructions for future reference. [. . . ] In Channel submenu select TV Channel List with the pq buttons and press OK to enter. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). With OK you can watch the selected channel in full screen mode. 5. 1. 1. 1 Edit Use this menu to favour, lock, skip, delete and rename channel list. With the pq buttons highlight a channel and press OK to select or press numeric button [0] to select all channels. Select Delete All Favourites with the pq and press OK, with tu select Yes in the confirmation window and press OK to delete or select No to cancel. 5. 1. 4 Delete all Use this menu to delete all channels. Select Delete All with the pq and press OK, then enter the Password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 Group Rename In this menu you can change favourite group name. At the appearing Keyboard use the pqtu buttons to highlight desired letters or numbers and press OK to insert. After you entered desired group name, highlight OK at the keyboard to confirm 3. Press EXIT button to cancel the group rename. 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the pq buttons to select Installation, press OK button to enter menu. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. 5. 2. 2 Channel Scan 1. Use the pq buttons to select Installation, press OK to enter the menu. With the pq buttons to select Channel Scan and press OK to enter the menu. Use the tu buttons to select one of two Scan Modes ­ By Channel and By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. Use the pq buttons to select Installation, press OK to enter the menu. If On is selected, the receiver will provide 5 V antenna power (for active antennas). 4. 5. 2. 4 LCN Mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. [. . . ] Input the correct password (the default password is 0000), Software Upgrade sub- menu is opened. Press EXIT" button to exit. 5. 5 Media+ Select "Media+" and press OK button to enter Media+ menu. Press pq buttons to highlight desired menu and press OK button to enter. 13 English PART 1 · English 5. 5. 1 Media Player This function allows you to play MPEG-2, Audio and Photo files from connected USB device 1. [. . . ]