User manual STRONG SRT 5003

[. . . ] Digital Terrestrial Receiver SRT 5003 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Návod k obsluze Upute za korištenje Picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories: 2. 0 Connection 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 Your Receiver 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default PIN- code: 0000 4. 0 First Time Installation 5. 0 Main Menu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels 7. 0 Trouble Shooting 8. 0 Specifications 2 2 3 3 4 4 4 4 4 4 4 4 5 5 5 5 7 8 10 11 11 11 12 12 12 13 English Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line per March 2010 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RoHS 2002/95EEC * €0, 14/Min. [. . . ] With OK you can watch W the selected channel in full screen mode. Edit U  se this menu to favour, lock, skip, delete and rename channel list. W  ith the qp buttons highlight a channel and press OK to select or press numeric button [0] to select all channels. This way of selection can be executed for each of the edit functions. Favor: T  o add selected channel or all channels to a favourite group, press the 1 button. Lock:  Lock channel or all channels press button [2], with tu select Yes in the To confirmation window and press OK to save. To Skip:  Skip channel or all channels press button [3], with tu select Yes in the confirmation window and press OK to save. W 2.  t the appearing Keyboard use the qptu buttons to highlight desired letters or A numbers and press OK to insert. After you entered desired group name, highlight OK at the keyboard to confirm 3.  ress EXIT button to cancel the group rename. P 5. 2 Installation 5. 2. 1 Auto Scan 1.  se the qp buttons to select Installation, press OK button to enter menu. U 2.  ith the qp buttons select Auto Scan, press OK to enter the menu. W 3.  ress the tu buttons to change Scan mode, and use the qp to highlight Search, P press OK to start auto scan. 5. 2. 2 Channel Scan 1. 2. 3. 4. U  se the qp buttons to select Installation, press OK to enter the menu. W  ith the qp buttons to select Channel Scan and press OK to enter the menu. U  se the tu buttons to select one of two Scan Modes – By Channel and By Frequency. W  hen By Channel is selected use the cursor buttons to select Scan Band and Channel No. . When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to 7 English PART 1 • English start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5. 2. 3 Antenna Setting 1. 2. 3. 4. P  ress MENU to enter main menu. U  se the qp buttons to select Installation, press OK to enter the menu. W  ith the qp buttons select Antenna setting and press OK to enter. If On is selected, the receiver will provide 5V antenna power (for active antennas). P 5. 2. 4 LCN Mode If LCN (Logical Channel Numbering) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. [. . . ] Select "Media+" and press OK button to P enter Media+ menu. 2.  ress pq buttons to highlight desired menu and press OK button to enter. Description for usage of buttons will be displayed on screen. 5. 5. 1 Media Player This function allows you to play MPEG1 and MPEG2 video, Audio and Photo files from connected USB device 1. n "Media+" menu, select "Media Player" and press OK button to enter Media Player menu. I 2.  ress pq buttons to select a desired item, and press OK or PLAY button to play the P desired files. [. . . ]