User manual STRONG SRT 5216

[. . . ] Digital Terrestrial Receiver SRT 5216 User manual picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV and DVD/Video Recorder 3. 3 Connecting to a Digital Audio Amplifier 3. 4 Connecting to RCA (Audio L/R, Video) 3. 5 Connecting a USB storage device 5. 0 Main Menu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TroubleShooting A. 2 Technical Specifications 2 2 3 3 3 3 3 3 4 4 4 4 5 5 5 5 5 5 6 7 8 9 10 10 10 11 11 11 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC, RoHS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line 1 English PART 1 • English 1. 0 Instruction 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Select Delete All with the pq and press OK, then enter the Password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 Group Rename In this menu you can change favourite group name. 2.  the appearing Keyboard use the pqtu buttons to highlight desired letters or numbers and press OK to At insert. After you entered desired group name, highlight OK at the keyboard to confirm. 3. Press EXIT button to cancel the group rename. 5. 2 Installation 5. 2. 1 Auto Scan 1.  the pq buttons to select Installation, press OK button to enter menu. Use 2. With the pq buttons select Auto Scan, press OK to enter the menu. 3.  Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. 1.  Use the pq buttons to select Installation, press OK to enter the menu. 2.  With the pq buttons to select Channel Scan and press OK to enter the menu. 3.  Use the tu buttons to select one of two Scan Modes – By Channel and By Frequency. 4.  When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, 5. 2. 2 Channel Scan 6 PART 1 • English highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5. 2. 3 Antenna Setting 5. 2. 4 Logical channel numbering If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. 1.  Press pq buttons to highlight desired menu and press OK button to enter the setting menus. Now you can select desired setting by pq buttons and confirm it with OK. 2. Press EXIT button to exit. 5. 3. 1 OSD Language 5. 3. 2 TV System This menu allows you to set OSD Language. Display Mode: PAL/NTSC/AUTO Aspect Ratio:  this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Use Screen)and AUTO. Video Output:  Switch the video output mode either to RGB or to CVBS RF System:  Use this option to set the mode for the modulator output to PAL-BG, PAL-I, PAL-DK, or NTSC. RF Channel:  Use this option to select the RF channel for the modulator. Please choose a channel which is not already being used by a local broadcaster or by other equipment in your home to prevent interference. [. . . ] With SRT 5216 you can record a channel while watching another within the same frequency. 0, 58 GB free space on the USB device and an accurate Time shift function is depending on the speed of the used USB device. 5. 5. 5 Safely Remove Storage Device 5. 5. 6 Disk Format In “Media+” menu, select “Safely Remove Storage Device” and press OK to safely remove the USB device. 1.  “Media+” menu, select Disk Format and press OK to enter this menu. In You will see actual used Device and Partition displayed, furthermore the available Capability in GB is shown. [. . . ]