User manual STRONG SRT 5301E

[. . . ] Digital Terrestrial Receiver SRT 5301E User manual Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Návod k obsluze Používateľská príručka Upute za korištenje Picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Connection 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 Your Receiver 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default PIN- code: 0000 4. 0 First Time Installation 5. 0 Main Menu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Programme Guide (EPG) 6. 3 Accessing the favourite channels 7. 0 Trouble Shooting 8. 0 Specifications 2 2 3 3 4 4 4 4 4 4 4 5 5 5 6 6 6 8 8 10 11 12 12 12 12 13 13 English 02 Jul 2013 17:20 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 1 PART 1 • English 1. 0 Instruction 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] 4 3. 4 Default PIN- code: 0000 5 English PART 1 • English 4. 0 First Time Installation 5. 0 Main Menu 5. 1 Channel If you use the receiver for the first time, the Easy Install menu appears. Use qp to select Region, OSD Language, Antenna Power and Scan Mode and tu to select options. Then use the qp buttons to move focus to Search and press OK to proceed with the automatic channel scan. In viewing mode press MENU at any time to enter the Main Menu. It consists of the following submenus: Channel, Installation, Setup, Tools and Media+ 1. Use the qp buttons to select Channel and press OK to enter. 2. Use the qp buttons to highlight the desired item and press OK to select. 3. Press EXIT to exit. NOTE:  can also press OK in TV mode to enter the channel list. You 5. 1. 1 TV Channel list 1. In the Channel submenu select TV Channel List with the qp buttons and press OK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up favourite groups). Use the qp buttons to move the selected q channel to the desired position. Press OK, use tu to select Yes in the confirmation window and press OK to save the changed position. 5. 1. 2 Radio Channel list The operation of the Radio Channel List is the same as in the TV Channel List. Since there is no video information in radio mode, the radio background will be displayed in the preview window on the right. 5. 1. 3 Delete all favourites and groups Use this menu to delete all favourite channels. Use tu to select Yes in the confirmation window and press OK to delete or select No to cancel. 5. 1. 4 Delete all Use this option to delete all channels. Select Delete All with qp and press OK, then enter the password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 Rename group In this menu you can change the name of favourite groups. After entering the desired group name, highlight OK at the keyboard to confirm. 3. Press EXIT to cancel the group rename. 7 English PART 1 • English 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the qp buttons to select Installation and press OK to enter menu. Use qp to highlight Search and press OK to start auto scan. 5. 2. 2 Channel Scan 1. 2. 3. 4. Use the qp buttons to select Installation and press OK to enter the menu. Use the tu buttons to select the desired scan modes – By Channel or By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Set Network Search to ON or OFF, highlight Search and press OK to start scanning. Found channels will be stored and the receiver will switch to the first channel in the list. 5. 2. 3 Antenna Setting 1. 2. 3. 4. Press MENU to enter main menu. [. . . ] For further details visit our website www. strong. tv or contact your local Service line. Select Media+ and press OK to enter the Media+ menu. Use the two button rows in bottom of your remote control for player operation. A help screen showing how to use the buttons will be displayed on screen. 5. 5 Media+ 5. 5. 1 Media Player This function allows you to play MPEG-1 and MPEG-2 video, audio and photo files from a connected USB device. 1. In the Media+ menu, select Media Player and press OK to enter the menu. [. . . ]