User manual SWISSVOICE L7

[. . . ] cordless telephone with answering machine Safety precautions Caution: Warning/danger statement, follow safety precautions!➭ Please note that the ringer for incoming calls as well as signal tones are emitted on the handset loudspeaker. Do not therefore hold the handset close to your ear while one of these functions is on, otherwise your hearing may be affected. Use only one of the supplied mains adapter 6 VDC / 400 mA for the base station. ➭ Rechargeable batteries Use only the approved rechargeable Li-Ion battery cell (Swissvoice C0487 or ➭ 043048, 3. 7V, 550mAh, 2. 04Wh) supplied with your L7. [. . . ] 4. 4. 3 Transfer a call You can transfer an external call to another handset registered to the base. If you short press PTT key, the external call is transferred to handsets and base is not ringing anymore. As soon as one handset answers, it is in communication with the external party. NOTE - If there is no answer from the other handset and you wish to return to your external caller, long press PTT key 4. 4. 4 Push-To-Talk – Internal broadcasting voice message This Push-To-Talk feature allows you to broadcast from the base to every L7 handset. Release PTT key to finish the broadcast. 5. Contacts You can store up to 100 names and numbers in the Contact list. You can also select different ringer melodies for different contacts entries. 5. 1 Add new entries in the Contact list 1. Scroll NOTES - When the Contact list is empty, you cannot enter the first entry using the softkey Names, you must enter it over the menu: Press Menu, scroll to Contact then to Add entry. - If the L7 is connected to a switchboard, you may need to enter a pause in a number. Press Press Clear to delete a character, or press and hold Clear to delete all characters. The entry is stored. 5. 2 Edit the Contact list using the softkey Names 1. Scroll or to the entry you want or search alphabetically entering the first letter of the name. Press Options and select a function from the following list: - Search – Enter the first letter of a name to search alphabetically (e. g. - Copy Phonebook – Copy the entire Contact list to another handset. If an entry with the same number is already stored in the receiving handset, it will not be copied. - Memory Status – Display the used and free Contact list memory. to dial the displayed entry. 5. 3 Edit the Contact list using the menu Contact 1. Press Options and select a function from the following list: - Show Details – Show name, number and melody of the selected entry. - Edit Entry – Edit name, number and melody of the selected entry. - Ringtone – Assign the desired ringtone. 18 Delete Entry – Delete the selected entry from the Contact list. or to Key X where the Fast Call – Store a Fast Call number: scroll entry will be stored, press Select. Delete a Fast Call number: select Clear Entry and press Select to confirm. 6. Calls list If you have subscribed to Caller ID service, and provided the identity of the caller is not withheld, the number of the caller is displayed (if provided by the network). New calls are displayed with . If the caller’s number is stored in your contacts, the name will also be displayed. [. . . ] • Check that the mains power is connected properly and switched on. Keypad does not seem to work • Check that the keypad lock is not on. 28 icon is not scrolling during charge • • • • Adjust the handset slightly on the base. When the handset is fully charged, No Caller ID • Check your subscription with your network operator. Check that you have the correct name / number stored in your phonebook, with the full area code. I have forgotten my PIN! Remove one battery, press and hold the star button on the handset and replace the battery. The handset will automatically reset and the PIN will default back to 0000. Cannot register a handset to the base • You can register up to a maximum of 8 handsets to a L7 base. [. . . ]