User manual SWITEL DC 6322 COMBO

[. . . ] Kombi­Set aus schnurgebundenem Telefon und Schnurlostelefon mit XL­Tasten Kit téléphone filaire et téléphone sans fil avec grandes touches Combinazione di telefono a cavo e telefono cordless con tasti XL Combination set comprising cable­connected telephone and cordless telephone with XL­keys DCC632x Combo Bedienungsanleitung Mode d'emploi Istruzioni per l'uso Operating Instructions 2 Bedienungsanleitung . 130 99 General information 1 General information Before Initial use Thank you for purchasing this new digital cordless telephone. intended Purpose: This product is intend to be connected indoor to an analogue telephone line. This product is made in accordance with the Digital Enhanced Cordless Telecommunications (DECT). [. . . ] The position number of the call in the calls list appears next to the CLIP symbol. Info: The phone reverts to standby mode if neither the up or down key is pressed within 15 seconds. When a call is received, the caller's number is shown in the display for another 5-8 seconds after the last ring. 3 Pick up the receiver or press the hands free key again to make the call. Storing a number in the phone book or as an abbreviated dialling number under M1 to M3 1 Press the calls list key. 3 Select "SAVE TO PB" or "SAVE TO MX" (MX = M1 to M3) and confirm. Deleting one entry or all entries in the calls list 1 Press the calls list key. 17 Making an internal call to a handset and forwarding a call to the cordless handset You can forward a call from the base station to the handset or talk to the external subscriber and a second subscriber on the cordless handset at the same time (conference call). 1 Hold down the INT key for 3 seconds until you hear an audio signal, then release the key. Once the call has been set up with the handset, you can talk internally. 18 Finding the handset (paging function) You can use this function to locate your handset. The handset will ring for 30 seconds and the red LED on the handset will flash. 19 The R key (Flash) Press the Flash key on the base station to use special services on your external line such as "call waiting" (providing your telephone line provider offers this service) or to forward a call when you are using a PBX. However, if your system requires a longer flash time, you can change this. 116 Using the cordless handset 5 Using the cordless handset Info: This section only describes the functions of the cordless handset!Information on using the base station can be found in „4 Operating the telephone“. If you do not press any key for 10 seconds, the number disappears and the handset reverts to standby mode. Redialling one of the last 3 telephone numbers called 1 Press the redial key. If you want to redial one of the last 3 numbers, keep pressing the redial key until the number you want appears in the display. 3 Incoming calls When an incoming call is received, the handset and the base station ring and the "Visual call signal" 117 Using the cordless handset LED flashes on the handset and base station. 4 Activating/deactivating hands free mode You can use this function to answer a call without having to hold the handset or if the a call is already being conducted on the handset. 2 Press the hands free key again to switch the call back to the handset. [. . . ] 2 V, 450mAh AAA type rechargeable NiMh batteries Input: 100~240 V AC / 50-60 Hz Output: 6 V DC / 500 mA Input: 230 V AC / 50 Hz Output: 7 V DC / 420 mA 100 hours 10 hours 16 hours +5 °C to + 45 °C 25 to 85 % Pulse and tone dialling (DTMF) 100 or 300 ms 50 phone book entries of up to 24 digits and 16 letters. 200 mm x 71 mm x 183 mm / 104 mm x 100 mm x 59 mm / 182 mm x 284 mm x 58 mm 763 g with mains adapter / 185 g with mains adapter / 147 g with batteries Base station with receiver: 2. 3 W Frequency range Emissions Range Handset batteries: Base station power supply Charger power supply: Handset standby time: Handset talk time Charging time: Permitted operating temperatures Permitted relative humidity Dialling mode Flash time Handset number memory Base station number memory Dimensions Base station / Charger / Handset Weight Base station / Charger / Handset Maximum power consumption 129 Warranty 12 Warranty SWITEL equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble-free functioning and a long service life. [. . . ]