Detailed instructions for use are in the User's Guide.
[. . . ] »
CD-160MK#
Compact Disc Player
OWNER'S MANUAL
D00945120A
IMPORTANT SAFETY PRECAUTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. [. . . ] When using the unit to control the CD-160MKII,
TASCAM
CD-160MKll
1 - Introduction
Batteries
If batteries are used improperly, or if leakage or breakage occurs, the unit will not function. Please observe the cautions indicated on the batteries and their packaging to ensure proper usage.
ª
Inserting batteries
1. Closethelid.
· Confirm + and polarity and follow the indications
when inserting new batteries into the remote control.
· Do not use old and new batteries together. · Even if the battery is the same size, the voltage may differ.
Do not use batteries of different specifications together.
· Do not attempt to recharge batteries that are nonrechargeable.
· Do not open or disassemble batteries, throw them into a
fire or put them in water.
Connections
CAUTION
NOTE
Turnoffthepowerofalltheequipmentbefore makingconnections. Besuretoinserteachplugsecurely. Topreventhum andnoise, donotbundletheconnectioncordswith thepowercord.
Beforemakingarecordingwitharecorderconnectedtothisunit'sdigitaloutputs, youneedto standbythisunitinplaybackmode. BesuretoconnectthepowercordtoanACoutlet whichsuppliesthecorrectvoltage. Holdthepower plugwhenpluggingorunpluggingthepowercord. TheDigitaloutputontheCD-160MkIIdoesnotincludetrackincrementdata. Somerecordersdepend onthisinformationtoautomaticallyupdatetrack numberswhiledubbing. Ifyouneedthisfunction, pleaseconnecttheCD-160MkIIandtherecording devicewiththeanalogconnectionsanduse"level detection"modeontherecordertodetecttrack changes(pleaserefertothemanualoftherecorder forhowtoselectthismode).
Connect ANALOG OUTs (L, R) jacks to the input jack of the amplifier with a RCA cable. Make sure to connect: white plug white jack (L: left channel) red plug red jack (R: right channel) Use an optical cable to output the signal from the DIGITAL OPTICAL OUT to the amplifier or recorder's input. Use a RCA cable to output the signal from the DIGITAL COAXIAL OUT to the amplifier or recorder's input. After all other connections are complete, connect the plug to the AC wall socket.
CD-160MK#
R
L
DIGITAL IN DIGITAL IN
ANALOG IN
TASCAM CD-160MKll
2 - Features of the CD-160MKII
Front panel and RC-162C remote control unit
1 2 34 5 6
7
8
9
0
qwe
7 PHONES jack and knob
r
RC-162C remote control unit
For private listening, insert the headphones plug into this jack, and adjust the volume by turning the level knob. When operating the remote control unit, point it towards here.
8 PITCH CONTROL switch and knob
t
9 Remote Sensor
0 Display
e y u r 6 q w 5 4
q SHUFFLE
Use this key for shuffle playback.
w REPEAT
Use this key for repeat playback.
e PROGRAM
Use this key to program tracks.
r MP3 FOLDER (§/¶)
During playback of a MP3 disc, use these keys to select a folder in the disc.
t Numeric keys (remote control only)
Use these keys to select tracks.
1 POWER y ESP/MP3 (remote control only)
Press this switch to turn the unit on or off.
2 Disc tray 3 OPEN/CLOSE
Use this key to open and close the disc tray. Use this key to stop playback of CD/MP3.
During playback of a MP3 disc, use this key to search track name. During playback of CD, use this key to switch the ESP function on or off. The default setting is off.
u INTRO CHECK (remote control only)
4 PLAY/READY (¥/) 5 STOP (ª)
Use this key to start the Intro Check.
NOTE
6 SEARCH (Ô/) / Â/¯ (SKIP)
Use these keys to skip tracks. Hold down these keys to search for a part of a track.
Tosimplifyexplanations, instructionsinthismanual refertothenamesofthekeysandcontrolsonthe frontpanelonly. Associatedcontrolsontheremote controlwillalsooperatesimilarly.
10 TASCAM
CD-160MKll
2 - Features of the CD-160MKII
Rear panel
1
23
4
5
1 ANALOG OUTPUT L, R jacks (UNBALANCED)
5 AC Power Cord
Analog 2-channel audio signal is output from this jack.
2 DIGITAL COAXIAL OUTPUT jack
After all other connections are complete, connect the plug to the AC wall socket.
This RCA jack output SPDIF digital audio data to the amplifier.
NOTE
Thisunitcannotoutputthedigitalaudiodatawhen PitchControlisON, andESPisONduringplayback ofaCD.
3 DIGITAL OPTICAL OUTPUT jack
This compatible connector output S/PDIF digital audio data to the amplifier.
NOTE
Thisunitcannotoutputthedigitalaudiodatawhen PitchControlisON, andalsoESPisONduringplaybackofaCD.
4 VOLTAGE SELECTOR Switches the voltage to either 230 V or 120 V.
NOTE
Thevoltageselectorisonlyavailableonunitsfor NorthAmericanmarket.
TASCAM CD-160MKll
11
2 - Features of the CD-160MKII
Display
12 34 5 67
8
1 SEARCH / SEARCH ALBUM
9
When the Search function is on, SEARCH or SEARCH ALBUM is lit according to the selected mode.
2 SHUFFLE SHUFFLE is lit when this function is on. 3 REPEAT display
When the Repeat function is on, the display shows the repeat playback mode currently selected. 4 INTRO INTRO is lit when this function is on.
5 MEMORY MEMORY is lit when Program playback is on. 6 ESP display (ESP) is lit when ESP (Electric Shock Protection) is on. When a MP3 disc
containing folders is loaded, the display shows the total number of the folders.
8 Track number display
When a CD is loaded, the display shows the total number of tracks. When a MP3 disc containing folders is loaded, the display shows the total number of the folders.
NOTE
Wheninsearchmode(MP3only), theinitialletterof atracknameappearsonthedisplay(see"Searchfor anameoftrack"onpage20).
9 Counter display
This shows the time information of the disc.
NOTE
Wheninsearchmode(MP3only), thedisplayshows atrackname(see"Searchforanameoftrack"on page20).
1 TASCAM
CD-160MKll
3 - Disc operations
MP3 files and directories
CDs containing MP3 files can be played by the CD-160MKII with the following limitations on the number of files and directories. Maximum number of directories: 200 Maximum number of MP3 files: 500 File format: MPEG 1/2/2. 5 Layer2/3(ISO/IEC 11172-3, ISO/IEC 13818-3. 2) Bit rate: 32kbps to 320kbps (over 128kbps is recommended) Sampling frequency: 32 kHz/44. 1 kHz/48 kHz, Mono or Stereo File extension: mp3, Mp3, mP3, MP3
NOTE
TheCD-160MKIIcanonlyreadthefilesinthefirst sessionofamulti-sessiondisc. [. . . ] SHUFFLE will then light up in the display.
POWER, OPEN/CLOSE.
Intro Check
a track you want to listen to is found, press the INTRO CHECK key to resume normal playback.
· To skip to the next or a previous track, press the skip key. · Repeat and shuffle playback don't work during the
intro check.
· If one of the following keys is pressed, the intro check
Press the INTRO CHECK key in the stop or play mode. The INTRO indicator lights on the display, and the beginning of all the tracks is played for 10 seconds each. When
TASCAM CD-160MKll
mode will be cancelled: INTRO CHECK, SHUFFLE,
STOP, POWER, OPEN/CLOSE.
1
3 - Disc operations
Search Mode (MP3 only)
Search for a name of track
You can select the track by searching for its name. [. . . ]