User manual TEKTRONIX AWG5000 DATASHEET

[. . . ] AWG5000 Series models, with a 14-bit DAC, sample rates up to 1. 2 GS/s, 2 to 4 output channels, synchronized 4 to 8 digital marker outputs, and 28 channels of digital data outputs, easily solve the toughest measurement challenges in wireless communications, defense electronics, digital consumer product design, data conversion equipment, test system synchronization, and semiconductor design and test. The open windows (Windows 7) based instruments are easy, convenient to use, and connect with peripherals and other third-party software. The capabilities of the AWG5000 Series are further enhanced by the addition of key features: Dynamic Jump The Dynamic Jump capability enables the creation of complex waveforms by enabling the ability to dynamically jump to any predefined index in a waveform sequence. [. . . ] The editor provides control and flexibility to create more complex waveforms using customer-defined parameters. Waveform Sequencing and Subsequencing Real-time sequencing creates infinite waveform loops, jumps, and conditional branches for longer pattern-length generation suitable for replicating real-world behavior of serial transmitters. Mixed-signal Generation AWG5012 and AWG5002 models have an optional 28 digital output channels with high-resolution edge placement, making them a great solution for digital signal generation applications, such as digital design and validation, system synchronization, and ADC/DAC testing. 2 www. tektronix. com/awg5000 Arbitrary Waveform Generators -- AWG5000 Series Characteristics Definitions Specifications (not noted) ­ Product characteristics described in terms of specified performance with tolerance limits which are warranted/guaranteed to the customer. Specifications are checked in the manufacturing process and in the Performance Verification section of the product manual with a direct measurement of the parameter. Typical (noted) ­ Product characteristics described in terms of typical performance, but not guaranteed performance. The values given are never warranted, but most units will perform to the level indicated. Typical characteristics are not tested in the manufacturing process or the Performance Verification section of the product manual. Nominal (noted) ­ Product characteristics described in terms of being guaranteed by design. Nominal characteristics are non-warranted, so they are not checked in the manufacturing process or the Performance Verification section of the product manual. AWG5000C Series Specifications General Characteristics Characteristic AWG5014C AWG5012C AWG5002C Digital to Analog Converter Sample rate Resolution Sin (x)/x Roll-off Sin (x)/x (­1 dB) Sin (x)/x (­3 dB) 10 MS/s to 1. 2 GS/s 14 bit 300 MHz 520 MHz 10 MS/s to 600 MS/s 150 MHz 260 MHz www. tektronix. com/awg5000 3 Data Sheet Frequency Domain Characteristics Characteristic Output Frequency Characteristics AWG5014C AWG5012C AWG5002C Effective Frequency Output Fmaximum Fmaximum (typical) Effective Frequency Switching Time Standard Ts Ts (typical) Modulation Bandwidth Mod bandwidth (­1 dB) (typical) Mod bandwidth (­3 dB) (typical) Output Amplitude Characteristics Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR/2. 5" 480 MHz 240 MHz 540 MHz 275 MHz Minimum frequency switching time from selected frequencies F1 to F2 is determined as "1/Fmaximum" 2. 1 ns 4. 2 ns 1. 8 ns 3. 7 ns Modulation bandwidth is determined as a combination of Sin (x)/x roll-off and rise-time bandwidth collectively corrected to <1 dB by external measurement and calibration over the applicable frequency range Normal: Up to 130 MHz Normal: Up to 100 MHz Direct: Up to 180 MHz Direct: Up to 130 MHz Normal: Up to 230 MHz Normal: Up to 180 MHz Direct: Up to 300 MHz Direct: Up to 230 MHz Amplitude levels are measured as single-ended outputs. Amplitude level will be 3 dBm higher when using differential (both) outputs Normal: ­30 dBm to 17 dBm Direct: ­30 dBm to 0 dBm 0. 01 dB At 0 dBm level, with no offset, ±0. 3 dB Mathematically corrected for characteristic Sin (x)/x roll-off, uncorrected by external calibration methods ±1. 0 dB, from 10 MHz to 480 MHz 14-bit output on Ch1 and Ch2 (28 total) SMB (rear panel), single ended 50 ­1. 0 V to 2. 7 V 0. 1 Vp-p to 3. 7 Vp-p 10 mV ±(10% of setting + 120 mV) ±54 mA per channel 300 ps (1. 0 Vp-p, Hi: 1. 0 V, Lo: 0 V) ­41 ns to ­82 ns <400 ps Amplitude Range Resolution Accuracy Output Flatness Flatness (typical) Digital Data Out (Option 03) Number of outputs Output connector Output impedance Digital Data Out Levels (into 50 ) Window Amplitude Resolution Accuracy Current (max) Rise/Fall time (20% to 80%) Delay from marker Skew between outputs 4 www. tektronix. com/awg5000 Arbitrary Waveform Generators -- AWG5000 Series Time Domain Characteristics Characteristic Data Rate Characteristics AWG5014C AWG5012C AWG5002C Data Rate Bit rate (typical) Rise/Fall Time Characteristics Bit rate is determined as "sample rate / 4 points per cycle", allowing full impairment generation 300 Mb/s 150 Mb/s Rise/Fall time measured at 10% to 90% levels Normal: 1. 4 ns Direct: 0. 95 ns Rise-time bandwidth converted from rise-time (0. 34/Tr, assumed Gaussian transition) characteristics through analog output circuitry and cabling Normal: 140 MHz Direct: 210 MHz Normal: 250 MHz Direct: 370 MHz Normal: Bessel Type, 50 and 100 MHz Amplitude levels are measured between differential outputs (+) and (­) For single-ended output (+) the amplitude level will be one-half the levels below Normal: 40 mVp-p to 9. 0 Vp-p Direct: 40 mVp-p to 1. 2 Vp-p 1. 0 mV At 0. 5 V, with no offset, ±(2% of amplitude ±2 mV) Normal: ±2. 25 V 1. 0 mV At minimum amplitude, ±(2. 0% of offset ±10 mV) Rise/Fall Time Tr/Tf Rise Time Bandwidth Tr bandwidth (­1 dB) (typical) Tr bandwidth (­3 dB) (typical) Low-pass filter Output Amplitude Characteristics Amplitude Range Resolution Accuracy Offset Range Resolution Accuracy www. tektronix. com/awg5000 5 Data Sheet Common Characteristics Characteristic Output Distortion Characteristics AWG5014C AWG5012C AWG5002C Spurious Free Dynamic Range (SFDR) SFDR (Direct) (typical) DC to 10 MHz carrier 10 to 20 MHz carrier 20 to 40 MHz carrier 40 to 80 MHz carrier 80 to 150 MHz carrier 150 to 300 MHz carrier 300 to 480 MHz carrier Spurious Free Dynamic Range (SFDR) SFDR (Direct) (typical) DC to 10 MHz bandwidth DC to 20 MHz bandwidth DC to 40 MHz bandwidth DC to 80 MHz bandwidth DC to 150 MHz bandwidth DC to 180 MHz bandwidth SFDR is determined as a function of the directly generated carrier frequency. Harmonics not included Clock: 0. 6 GS/s, 14-bit operation Clock: 1. 2 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 Vp-p) Level: 4 dBm (1 Vp-p) Offset: None Offset: None ­70 dBc ­74 dBc ­70 dBc ­70 dBc ­62 dBc ­62 dBc ­62 dBc ­57 dBc ­58 dBc ­54 dBc ­58 dBc ­54 dBc ­56 dBc When viewed as a modulation bandwidth and used with external frequency up-conversion, the specifications will hold and be independent of carrier frequency with proper conversion circuitry design. (12, 192 m) Top/Bottom Side Rear Power Supply 2 15 7. 5 100 to 240 V AC, 47 to 63 Hz 450 Watts 0. 8 6 3 Rating Consumption 0. 33 mm p-p (0. 013 in p-p) constant displacement, 5 to 55 Hz N/A 0. 27 g RMS, 5 to 500 Hz, 10 minutes per axis 2. 28 g RMS, 5 to 500 Hz, 10 minutes per axis Half-sine mechanical shocks, 30 g peak, 11 ms duration, 3 drops in each direction of each axis Half-sine mechanical shocks, 10 g peak, 11 ms duration, 3 drops in each direction of each axis UL61010-1, CAN/CSA-22. 2, No. 61010-1-04, EN61010-1, IEC61010-1 EN55011 (Class A), IEC61000-3-2, IEC61000-3-3 IEC61326, IEC61000-4-2/3/4/5/6/8/11 Emissions Immunity Regional certifications Europe EN61326 Australia / New AS/NZS 2064 Zealand www. tektronix. com/awg5000 11 Data Sheet Ordering Information Arbitrary Waveform Generator Mainframe AWG5014C 1. 2 GS/s, 14-bit resolution, 16M point per channel, 4-channel arbitrary waveform generator Language Options Option Description Opt. Opt. L0 L5 L7 L8 L10 English Japanese Simplified Chinese Traditional Chinese Russian AWG5012C 1. 2 GS/s, 14-bit resolution, 16M point per channel, 2-channel arbitrary waveform generator Application Software Model Option Description AWG5002C RFX100 Opt. UWBCT 600 MS/s, 14-bit resolution, 16M point per channel, 2-channel arbitrary waveform generator All Models Include: Accessory pouch, front cover, USB mouse, compact USB keyboard, lead set for DC output, stylus for touch screen (2 ea), AWG5000C Series product software CD and instructions, documentation CD with browser, Quick Start User Manual and registration card, Certificate of Calibration, and power cable. Note: Please specify power cord and language option when ordering. Opt. SSC Instrument Options Option Description AWG5014C/AWG5012C/AWG5002C Opt. 09 Waveform Length Expansion (from 16M to 32M) Subsequencing and Dynamic Jump option (subsequencing files created for legacy AWG400, AWG500, AWG600, and AWG700 instrument are compatible with this option) 28-bit digital data outputs (digital data of CH1 and CH2) Note: Must be ordered at time of purchase Combination of Option 03 and Option 09 Note: Must be ordered at time of purchase AWG5012C/AWG5002C Opt. [. . . ] (51 cm) Rackmount Kit with Instruction Front Removable HDD Front Removable HDD Bay Bay Replacement Hard Disk Accessory Kit, Hard-drive for AWG5000/7000 Series Assembly, V4. 0 Programmed FW English Quick-start User Manual Japanese Simplified Chinese Traditional Chinese Russian Programmer Manual English English Option 09 User Manual English Service Manual 012-1690-xx 012-1503-xx 016-1983-xx 016-1979-xx 650-5336-xx 071-2481-xx 071-2482-xx 071-2483-xx 071-2484-xx 020-2971-xx 077-0061-xx 020-2971-xx Visit Tektronix website Warranty One-year parts and labor. Product(s) are manufactured in ISO registered facilities. Product(s) complies with IEEE Standard 488. 1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. www. tektronix. com/awg5000 13 Data Sheet 14 www. tektronix. com/awg5000 Arbitrary Waveform Generators -- AWG5000 Series www. tektronix. com/awg5000 15 Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7600 Canada 1 800 833 9200 Central East Europe, Ukraine, and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean (52) 56 04 50 90 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098 People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 7484900 South Africa +41 52 675 3777 Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835* Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 Updated 25 May 2010 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. [. . . ]