User manual TEKTRONIX AWG710B DATASHEET

[. . . ] Gated ­ Waveform begins output when gate is true and resets to beginning when false. Enhanced ­ Waveform is output as defined by the sequence. Extended Operation Function Generator Sampling Frequency ­ 50. 000000 kS/s to 4. 2000000 GS/s. Phase Noise ­ (VCO out) At 4. 2GS/s, 10 kHz offset: ­65 dBc/Hz. Internal Trigger Generator Internal Trigger Rate ­ Range: 1. 0 µs to 10. 0 s. [. . . ] Rise/Fall Time (20% to 80%) ­ <130 ps into 50 to GND (1. 0 Vp-p, Hi +1. 0 V, Lo 0 V). Period Jitter (Typical) ­ by1010 clock pattern At 4. 2 GS/s 2. 0 psRMS, 15 ps peak to peak. Delay (between analog output and marker output) ­ (Marker Level: 1 Vp-p (Hi + 1V/Lo 0V), Analog Output: At 1 Vp-p). Connector ­ Front-panel SMA. VCO Out Marker Level: Hi Level: 1 V into 50 . Lo Level: 0 V into 50 . Type ­ 20, 50, 100, 200 MHz Bessel low-pass. Rise Time (10% to 90%) ­ 20 MHz, 17 ns; 50 MHz, 7. 0 ns; 100 MHz, 3. 7 ns; 200 MHz, 2. 0 ns. Group Delay ­ 20 MHz, 18 ns; 50 MHz, 8 ns; 100 MHz, 4. 7 ns; 200 MHz, 3 ns. Direct D/A Out*1 Amplitude ­ CML, AC coupling, 0. 4 Vp-p into 50 to GND. Connector ­ Rear-panel SMA. 10 MHz Reference Clock Out Waveform mixing operation ­ Supports two-signals mixed output digitally. Synchronous operation ­ Supports synchronization of two AWGxxx boxes allowing two synchronized signal outputs. Note: This operation is executed by Sync master and Sync slave operation combination. Amplitude ­ 20 mVp-p to 1. 0 Vp-p into 50 . DC Offset Accuracy ­ 0 V ±10 mV at 20 mV amplitude (waveform data = 0). Amplitude ­ 1. 2 Vp-p into 50 . Connector ­ Rear-panel BNC. *1 Option 02 eliminates the ability to switch between normal and direct D/A out, as well as filter and offset control. 2 Signal Sources · www. tektronix. com/signal_sources Arbitrary Waveform Generator AWG710B General Characteristics Physical Characteristics Dimensions mm in. Height With option 11 Width Depth Weight 193 232 434 508 kg 7. 6 9. 1 17. 1 20 lb. Display ­ Color TFT LCD. Display Area ­ Horizontal: 13. 06 cm (5. 14 in. ), Vertical: 9. 70 cm (3. 81 in. ). Resolution ­ 640x480. Data Storage Internal Hard Disk ­ 20. 0 GB. Floppy Disk ­ 3. 5 inch, 1. 44 MB. Environment Without package With option 11 With package With option 11 Interfaces ­ GPIB, Ethernet: 10/100Base-T, RJ-45. PC Keyboard ­ 6-Pin mini-DIN, rear. 14. 1 16. 1 24. 5 27. 5 31. 1 35. 7 54 61. 1 C Out 1 and 2 For 2 boxes synchronous usage. Output signal style: Complementary. T Out 1 and 2 For 2 boxes synchronous usage. Output signal style: Complementary. Auxiliary Inputs Trigger In Threshold: TTL level. Delay to Analog Out (Jump timing: Async, Output Norm, Filter Through): Strobe: ON, 1691. 5 clocks + 10 ns. Strobe: OFF, 1947. 5 clocks + 6 ns. Temperature ­ Operating: +10 ºC to +40 ºC. [. . . ] Connector ­ Rear-panel BNC. C IN For 2 boxes synchronous usage. Input signal style: Complementary. T IN For 2 boxes synchronous usage. Input signal style: Complementary. Signal Sources · www. tektronix. com/signal_sources 3 Arbitrary Waveform Generator AWG710B Contact Tektronix: ASEAN / Australasia / Pakistan (65) 6356 3900 Austria +43 2236 8092 262 Belgium +32 (2) 715 89 70 Brazil & South America 55 (11) 3741-8360 Ordering Information AWG710B Recommended Accessories 4. 2 GS/s, 8-bit, 32 M point, single-channel arbitrary waveform generator. Includes: User manual, Programmer's manual, Floppy disk: sample waveform library (063-A3740-00), performance verification (063-3721-00), Sample Program (062-A258-50), AXW100 ArbExpressTM Software Utility CD (063-3763-00 ), Certificate of Calibration, power cable. [. . . ]