Detailed instructions for use are in the User's Guide.
[. . . ] User Manual
Phaser 360 Color Printer
First printing May 1998 070-9922-02
Copyright Tektronix, Inc. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Tektronix, Inc. Tektronix, Phaser, ColorStix, and Made For Each Other are registered trademarks of Tektronix, Inc. [. . . ] Use the Paper pop-up menu to select the printers supported paper sizes.
Select printer-specific options
1. In the Print dialog box, click the TekColor button to see the TekColor Options dialog box. Select printer-specic options:
s
Color Correction Quick Collate Tray Selection Check Print Print Quality Image Smoothing
s
s
s
s
s
4-38
Phaser 360 Color Printer
Printing Basics
4
Using the Apple LaserWriter 8 printer driver
Select media size
1. To select the printers supported paper sizes, use the Paper pop-up menu.
Select printer-specific options
1. Select printer-specic options:
s
Color Correction Quick Collate
Tray Selection
s
s
s
Check Print Print Quality Image Smoothing
s
s
User Manual
4-39
4 Printing Basics
Using the Phaser 360 GX printer driver
Note
Refer to the on-line manuals on the printer's CD-ROM for details on using the Phaser 360 GX printer driver.
Printing with a desktop printer
If you are using QuickDraw GX applications, do one of the following:
s s
Select any desktop printer in the Print dialog box. The application corresponding to the document opens, prints the document, and then quits.
If you are using non-QuickDraw GX applications, do one of the following:
s
Print to the default desktop printer with the Print command from the File menu. The application corresponding to the document opens, displays the Print dialog box, and waits for you to click Print. After printing the document, the application quits.
s
Selecting printing options
Most of the commands in the Printing menu are standard QuickDraw GX driver commands, and are documented by Apple (see the Macintosh Guide on-line document for details). Use the Printer Driver Defaults command in the Printing menu to set default options for the selected desktop printer.
Note
The printer defaults dialog box is also available through the Print command in the File menu for QuickDraw GX applications.
4-40
Phaser 360 Color Printer
Printing Basics
4
Printing from a UNIX workstation
Overview
You can print from a UNIX workstation through Ethernet, Token Ring, or parallel interfaces. Workstation users can print from any application that generates color PostScript or print screen shots with the PhaserPrint software. For instructions and examples on creating print queues for your specic platform, visit the Tektronix web site: http://www. tek. com/Color_Printers/ Or, you can contact Tektronix Customer Support at 1-800-835-6100. To use the TekColor color corrections and other printer features, use one of the following methods:
s
PhaserPrint for UNIX software functions like a printer driver for selecting printing options, and provides fast screen copy printing. The menus on the printers front panel let you select printing options; refer to page 6-1 for instructions on using the front panel. Downloadable utility les let you select printing options; refer to the on-line manuals on the printers CD-ROM for instructions.
s
s
User Manual
4-41
4 Printing Basics
UNIX workstations
For UNIX environments, Tektronix offers the optional PhaserPrint for UNIX software which offers driver-selectable printer options and provides fast, raster le and screen copy printing to Tektronix color printers. PhaserPrint for UNIX software is available for these workstations:
Workstation Sun SGI HP 9000 700/800 IBM RS/6000 DECstation DEC Alpha AXP Operating System SunOS 4. 1. 4, Solaris 2. 3 and 2. 4 IRIX 5. 2, 5. 3, 6. 2, 6. 3, and 6. 4 HP-UX 9. 0. 5 and 10. 2 AIX 3. 2 and 4. 2 ULTRIX 4. 0 and 4. 4 OSF/1 3. 0, 3. 2, and Digital UNIX 4. 0
The printers CD-ROM contains a demonstration copy of PhaserPrint for UNIX software and an on-line instruction guide in the unix/unixdemo directory. If you would like to purchase a licensed version of PhaserPrint software, contact your dealer or local Tektronix ofce. For ordering information, refer to Additional software (UNIX and VMS)PhaserPrint for UNIX software on page 10-6.
4-42
Phaser 360 Color Printer
Printing Basics
4
OpenVMS workstations
To print from OpenVMS workstations, the optional PhaserSym utility, a VMS print symbiont, functions as a driver for selecting printing options and as a queue manager. PhaserSym software is compatible with DEC workstations running OpenVMS version 5. 0 and later. PhaserSym software communicates over the printers TCP/IP Ethernet interface and is required for proper communication with the printer. For ordering information, refer to Additional software (UNIX and VMS)PhaserPrint for UNIX software on page 10-6. Additional information and tips are available through the following resources:
s
Tektronix web site: http://www. tek. com/Color_Printers/userdoc/introduction. html
s
HAL: Request a document catalog from HAL, the Tektronix fax library. Refer to Getting information by fax on page 9-3 for instructions.
User Manual
4-43
4 Printing Basics
Printing from specific applications
For printing from most applications, follow the instructions beginning on page 3-1 to install drivers and printer software. [. . . ] 65: Not listed.
Section 16 Other information
Original preparation date: March 10, 1994 RC Corrected MS & WV address 4/20/95 RC Revised product use 11/5/96 JMP Corrected Flash Point 4/28/97 JMP Revised product use 12/5/97 JMP Tektronix, Incorporated P. O. Box 500 Chemical Documentation Mail Stop 46-840 Beaverton, Oregon 97077 Printer information: 1-800-835-6100 MSDS information: (503) 627-7255
User Manual
11-5
11 Regulatory Information and Specifications
MSDS for silicone oil (drum fluid)
Section 1 Product identification
Trade name and Tektronix part number: Silicone fluid (found in maintenance tray) Product use: For use in Tektronix Phaser 006-7912-00 340/350/360 color printers.
Section 2 Information on ingredients
Ingredients: Polydimethylsiloxane Hazardous Ingredients: None. This is not a hazardous material as defined by the OSHA Hazard Communication Standard.
Section 3 Hazards identification
Potential Health Effects: Eyes: Direct contact may cause temporary discomfort with mild redness and dryness similar to windburn. Skin: A single prolonged exposure (24 to 48 hours) causes no known adverse effect. [. . . ]