User manual TOMY TE-M6C RP

[. . . ] It is only possible to visually and audibly monitor one camera at any time. Meaning that events occurring in vision of other camera units will go unnoticed until the manual process to view each camera is undertaken. [. . . ] Once active, press and hold the new Camera Units ON/OFF until both buttons start to flash. Scroll along to the `Add a Camera' ("+") screen and press the `select' button, at which point the Parent Unit shall enter `connect mode' indicated by the 'connection sequence' (shown below). Once successfully connected the `connection sequence' shall automatically be replaced by the Video Feed from the newly connected monitor. If a connection is unsuccessful repeat the above, ensuring steps b ­ d are conducted with 60 seconds of each other. Also try switching the existing Camera unit(s) OFF until a connection is made. SWITCHING BETWEEN CAMERA UNITS With more than one camera connected (and activated), it is necessary to switch feeds between camera units using the following steps: a. The Tomy Baby Monitor is designed to help you monitor your child and is not a substitute for adult supervision. Always keep electrically operated items and their cables out of reach of babies and younger children. Under no circumstances should you place any part of your monitor in or on a cot. Ensure all wiring is positioned safely so that children cannot become entangled and that no trip hazard is created. Under no circumstances should the adaptors supplied with this monitor be used with any other equipment. No other adaptors than those supplied should be used with your monitor. [. . . ] Is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC. This declaration is issued under the sole responsibility of Tomy UK Ltd. [. . . ]