User manual TOSHIBA TECRA 9000 FIELD REPLACEABLE UNIT DOCUMENTATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA TECRA 9000. We hope that this TOSHIBA TECRA 9000 user guide will be useful to you.
You may also download the following manuals related to this product:
TOSHIBA TECRA 9000 (4030 ko)
TOSHIBA TECRA 9000 (3972 ko)
TOSHIBA TECRA 9000 (4044 ko)
TOSHIBA TECRA 9000 (4291 ko)
TOSHIBA TECRA 9000 (4076 ko)
TOSHIBA TECRA 9000 (4003 ko)
TOSHIBA TECRA 9000 (3987 ko)
TOSHIBA TECRA 9000 (3952 ko)
Manual abstract: user guide TOSHIBA TECRA 9000FIELD REPLACEABLE UNIT DOCUMENTATION
Detailed instructions for use are in the User's Guide.
[. . . ] NOTE: Before removing any PC Card device, make sure it is "STOPPED" in the PC Card manager.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM drive
Base cover
Connector Release lever Select bay device
M2x3 silver screws
1. Pull out the select bay device in the direction of the arrow.
M2x8 silver Connector cover screws 1. [. . . ] Disconnect the modem board from PJ125 on the system board.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
WIRELESS LAN CARD REMOVAL
TM
Mini-PCI connector clips
Mini PCI cover
M2. 5x4 security torx screw
Wireless LAN card
Black coax cable
White coax cable
1. Remove one M2x4 security torx screw securing the mini PCIcover and lift out the cover.
TOP COVER REMOVAL
M2. 5x8 silver screws M2. 5x4 black flat head screw
2. Spread the Mini-PCI connector clips and pull the Wireless LAN card out of the connector about 45 degree angle.
Glass tape
M2. 5x14 black screw
LCD/FL cable
M2. 5x2. 8 silver flat PJ127 head screws M2x12 silver screws
Speaker cable
M2. 5x16 silver screws 1. Turn the computer upside down and remove the following screws: -2 M2. 5x2. 8 silver flat head screws -1 M2. 5x4 black flat head screw -4 M2. 5x8 silver screws -4 M2x12 silver screws -6 M2. 5x16 silver screws 2. Turn the computer right side up and open the display.
PJ122 M2. 5x8 silver screws Membrane switch cable 3. Disconnect the speaker cable from PJ127 and the membrane switch cable from PJ122 on the top board 4. Remove the glass tape securing the LCD/FL cable and disconnect the cable from the bottom board. Remove two M2. 5x8 silver screws and one M2. 5x14 black screw from the keyboard area. Note: When installing the top cover, ensure that the bluetooth coaxial cable is properly routed to the Bluetooth slot.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
COOLING MODULE REMOVAL
Cooling module Fan cable CPU
TM
CPU REMOVAL
M2. 5x10 black flat head screws Open Glass tape PJ770 Close
1. Remove the glass tape securing the fan cable and disconnect the cable from PJ770 on the top board. Insert a flat head screwdriver and rotate it counter-clockwise to unlock the CPU lock. Lift out the CPU.
MICROPHONE REMOVAL
SD/SOUND BOARD REMOVAL
SD interface cable
PJ1001 Sound interface cable PJ1000
Microphone PJ1003 Microphone cable 1. [. . . ] Carefully lift up the FL inverter board and disconnect the LCD/FL cable from CN1 and the FL cable from CN2. Remove four mask seals to expose four screws securing the LCD module assembly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA TECRA 9000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA TECRA 9000 will begin.