Detailed instructions for use are in the User's Guide.
[. . . ] Model Number Serial Number
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR
The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. The exclamation point in the triangle tells you that important operating and maintenance instructions follow this symbol.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
As a safety feature, the AC plug has one prong wider than the other. If the plug will not fit either way, the outlet is probably old and non-standard. [. . . ] The TV automatically cycles through all TV or CABLE channels depending on the mode selected, storing received channels in the channel memory.
PROGRAMM I NG NOW PL EASE WA I T CABLE
15
3
When channel programming is complete, the message at the right appears.
COMPLETED CABLE
2
4
22
Press CHANNEL to make sure channel programming has been done properly.
ADD/ERASE function
ENTER DEMO MENU ANT/VIDEO VOLUME CHANNEL
After performing the CH PROGRAM function, you can add or erase specific channels.
1 2
LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER
Select the channel to erase using the CHANNEL or button, or select the channel to add with the Channel Number buttons. until
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
L ANGUAGE English T V / CAB L E Cable START CH PROGRAM PUSH ADD / ERASE Add ANT 1 / 2 ANT1 START T IMER / CLOCK PUSH
To end push EXIT
1 4 7
100
TE RI VO
2 5 8 0
3
CH
6 9
CH RTN
3
Press (or highlighted.
) until "ADD/ERASE" is
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
VOL
ENT
ST RO BE
L ANGUAGE English T V / CAB L E Cable START CH PROGRAM PUSH ADD / ERASE Add Erase ANT 1 / 2 ANT1 START T IMER / CLOCK PUSH
ADV/ PIP CH
To end push EXIT
FA
FAV
MENU/ ENTER
FAV
4
Press
or
.
ADV/ PIP CH
To erase the channel or to select "Erase". The Press channel will be memorized.
STOP SOURCE
PLAY PIP
REC
TV/VCR
REW
STILL
LOCATE SWAP
EX IT
FF
5
Repeat steps 1 through 4 for other channels.
23
GETTING STARTED
PR EV IE W
CHAPTER 2 GETTING STARTED
Aligning the colors
· This projection TV uses three separate TV tubes: a red one, a green one, and a blue one. The red, green, and blue images are projected onto the screen where they converge to form a full color picture. If you can see clear images on the screen, skip this procedure.
GETTING STARTED
To align the colors
ENTER DEMO MENU ANT/VIDEO VOLUME CHANNEL
This adjustment should be made after the TV has been on for at least 30 minutes.
To check and align the colors
1
Press MENU, then press or the PICTURE menu appears.
until
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
CONTRAST BR I GHTNESS COLOR T I NT SHARPNESS
To end push EXIT
LIGHT RECALL POWER TV CABLE VCR
2
Press (or ) until "CONVERGENCE" is highlighted.
PICTURE
AUDIO
SET UP
PREMIUM
SBS
PREFERENCE C. CAPTION
MUTE TV/VIDEO TIMER
On F L ESH TONE NO I SE REDUCT I ON On START CONVERGENCE PUSH
1 4 7
100
TE RI VO
2 5 8 0
3
CH
6 9
CH RTN
To end push EXIT
VOL
ENT
ST RO BE
3
ADV/ PIP CH
Press or to display the center CONVERGENCE menu. If alignment is correct, there will be one vertical and one horizontal white line.
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
To end push EXIT
FA
FAV
MENU/ ENTER
FAV
ADV/ PIP CH
4
STOP SOURCE
PLAY PIP
REC
TV/VCR
REW
EX
IT
E PR EW VI
STILL
FF
If you see separate colored lines, you have to align the colors. Press ENTER to select "RED" or "BLUE. " The selected color is highlighted.
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
To end push EXIT
LOCATE SWAP
5
Press the " (up)", " (down)", " (left)" or " (right)" button to converge the red or blue line into the green line. When color convergence is correctly adjusted, you will see two single white lines.
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
To end push EXIT
24
To align the colors (continued)
6
Press EXIT to display the circumference CONVERGENCE memu.
1
2
3
4
PUSH 19
6
7
8
9
7
Press the corresponding Number button (1-9) to select the place you want to adjust. Example: Number 1
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
8
Press ENTER to select "RED" or "BLUE". The selected color is highlighted.
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
9
Press , , , or to converge the red or blue line into the green line. Repeat steps 8 and 9 until you see two single white lines.
RED BL UE PUSH ENTER TO SE L ECT COL OR PUSH EX I T TO SELECT POS I T I ON
10
Press EXIT once to select any other place you want to adjust, then repeat steps 7 through 9. The noise should be reduced.
Follow steps 1 and 2 above.
Press or to select "SAP. " You will hear only the second language from the left and right speakers.
PICTURE
AUDIO
SET UP
PREMIUM
SBS
PREFERENCE C. CAPTION
MTS BASS TREBL E BAL ANCE SPE AKERS
STR
SAP MONO
On
To end push EXIT
Notes: · Be sure to select the "STR" mode if the broadcast is in stereo. · The MTS function is not available while in VIDEO mode.
31
BASIC OPERATION
When the TV receives a stereo broadcast, the word "STEREO" (or "SAP") is displayed on the screen. It is also displayed whenever the TV is turned on, a channel is selected, or the RECALL button is pressed.
STEREO SAP
PR EV IE W
CHAPTER 4 ADVANCED OPERATION
Enhancing the Surround Sound Effect
· This TV allows you to activate or deactivate the stereo surround effect.
To activate the Surround sound function
ENTER DEMO MENU ANT/VIDEO VOLUME CHANNEL
1 2
Select the "STR" (stereo) mode following steps 1 through 3 on the previous page.
Press MENU, then press or the PREMIUM menu appears.
until
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
SURROUND
Off
To end push EXIT
LIGHT RECALL POWER TV CABLE VCR
MUTE TV/VIDEO TIMER
3
Press
or
to select "SURROUND. "
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
ADVANCED OPERATION
SURROUND
On
Off
1 4 7
100
FA R VO IT E
2 5 8 0
3
CH
6
To end push EXIT
9
CH RTN
VOL
ENT
ST RO BE
4
Press
or
to highlight "On. "
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
ADV/ PIP CH
SURROUND
On
Off
FAV
MENU/ ENTER
FAV
To end push EXIT
PR
IE
W
ADV/ PIP CH
STOP SOURCE
PLAY PIP
EX IT
EV
REC
TV/VCR
REW
FF
To deactivate the Surround sound function Select "Off" in step 4 above. Note: Normally you can leave the MTS function set to "STR" and the SURROUND sound function set to "On". The TV will automatically produce either Surround, stereo or monaural, whichever is broadcast.
STILL
LOCATE SWAP
32
CHAPTER 4 ADVANCED OPERATION
Operating the Sub-Bass System
· The Sub-Bass System allows you to improve bass performance (even when the sound volume is low).
To operate the Sub-Bass System
ENTER DEMO MENU ANT/VIDEO VOLUME CHANNEL
To activate the Sub-Bass System
1
Press MENU, then press the SBS menu appears.
or
until
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
SBS SBS LE VE L
Off
To end push EXIT
2
LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER
Press or highlighted.
until "SBS" is
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
SBS SBS LE VE L
On
Off
Press
or
to select "On. "
To end push EXIT
1 4 7
100
FA VO RI TE
2 5 8 0
3
CH
6 9
CH RTN
To adjust the SBS level
VOL
ENT
ST RO BE
FAV
1
Select "SBS LEVEL" in the SBS menu.
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
ADV/ PIP CH
SBS SBS LE VE L
On
Off
FAV
MENU/ ENTER
To end push EXIT
ADV/ PIP CH
2
EX
Press
or
to adjust the SBS level.
PICTURE AUDIO SET UP PREMIUM SBS PREFERENCE C. CAPTION
STOP SOURCE
PLAY PIP
IT
SBS LE VE L
REC TV/VCR REW FF
STILL
LOCATE SWAP
60
To end push EXIT
To deactivate the Sub-Bass System function Select "Off" in step 3 above. Note: The Sub-Bass System signal does not pass through the "VARIABLE AUDIO OUTPUT" jacks. (See page 58. ) However, the above on-screen displays will appear when the buttons are pressed.
33
ADVANCED OPERATION
3
E PR EW VI
CHAPTER 4 ADVANCED OPERATION
Setting the OFF Timer and the Clock
· With the OFF timer, you can set the TV to turn off automatically after a pre-determined period of time (in 10 minute increments, up to 180 minutes).
To set the OFF timer
1 2
LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER
Press TIMER to select the TIMER mode. The first digit will flash.
OFF T I MER 000
Press any two Number buttons to enter the length of time you want the TV to stay on. Example: 120 minutes Press 1, then 2.
OFF T I MER 1 00
OFF T I MER 1 20
1 4
ADVANCED OPERATION
2 5 8 0
3
CH
6 9
CH RTN
3
7
100
TE RI VO FA
Press TIMER again to start the timer. The display color will change from purple to blue, then the display will disappear.
OFF T I MER 1 20 TO SET OFF T IME PUSH 0 - 9 TO START PUSH T I MER
VOL
ENT
ST RO BE
ADV/ PIP CH
FAV
MENU/ ENTER
FAV
You can also set the OFF timer using the on-screen menu.
PR
W
ADV/ PIP CH
EX
EV
IE
1
STOP SOURCE
PLAY PIP
Select the SETUP menu, then press (or ) until "TIMER/CLOCK" is highlighted.
IT
PICTURE
AUDIO
SET UP
PREMIUM
SBS
PREFERENCE C. CAPTION
REC
TV/VCR
REW
FF
STILL
LOCATE SWAP
L ANGUAGE T V / CAB L E CH PROGRAM ADD / ERASE ANT 1 / 2 T IMER / CLOCK
START
PUSH PUSH PUSH PUSH PUSH
START START START START START
PUSH
To end push EXIT
2
Press or until the TIMER mode is displayed. Then press two Number buttons to enter the length of time you want the TV to stay on. [. . . ] During this period, TACP and THI will replace a defective picture tube without charge (1) year from the date of the original retail purchase, you pay labor charges involved in the replacement. Rental Units The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. [. . . ]