User manual TP-LINK TD-W8901G VERSION 1.0.1

[. . . ] TD-W8901G 54M Wireless ADSL2+ Router Rev: 1. 0. 1 1910010020 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. · DTIM: This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. · 802. 11 b/g: In the drop-down list you can select "802. 11g (54Mbps)" or "802. 11b (11Mbps)". "802. 11 b+g (54Mbps & 11Mbps)", which allows both 802. 11g and 802. 11b wireless stations to connect to the Router. Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network's RADIUS. · · · · · Active: If you wish to filter users by MAC Address, select "Activated", and "Deactived" for don't. Action: To filter wireless users by MAC Address, select "Allow Association" or "Deny Association" the follow Wireless LAN station(s) association. SSID Index: The index of the SSID, and in this model, you can only leave it as a default value of 1. SSID: Wireless network name shared among all points in a wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the same for all stations in your wireless network. · Broadcast SSID: When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. If you don't want to broadcast the Router's SSID, select "No". · Authentication Type: Select an authentication type from the drop-down list, which allows you to configure security features of the wireless LAN interface. Options available are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, and WPA2-PSK. Note: For most users, it is recommended to use the default Wireless LAN Performance settings. Any changes made to these settings may adversely affect your wireless network. Under certain 24 Multiple SSIDs Settings: These are the settings of the SSID. TD-W8901G 54M Wireless ADSL2+ Router User Guide circumstances, changes may benefit performance. Carefully consider and evaluate any changes to these wireless settings. [. . . ] Username & Password: Type the "User Name" and "Password" for your DDNS account. Wildcard support: Select the option to use Wildcard function 4. 5. 6 CWMP Choose "Access ManagementCWMP", you can configure the CWMP function in the screen (shown in Figure 4-39). The function supports TR-069 protocol which collects information, diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration Server). 46 TD-W8901G 54M Wireless ADSL2+ Router User Guide Figure 4-39 CWMP: Select activate the CWMP function. User Name/Password: Enter the User Name and password to login the ACS server. [. . . ]