User manual TRONIC KH 868 PORTABLE STEREO RADIO AND CASSETTE RECORDER WITH CD PLAYER

[. . . ] Function switch Waveband switch FM antenna CD door Volume control knob Bass boost CD skip/search forward button CD skip/search backward button CD program button CD repeat button CD stop button CD play/pause button CD LED display CD play/pause LED display CD repeat LED display CD program LED display Frequency indicator FM stereo LED indicator Cassette compartment Cassette record button Cassette play button Cassette rewind button Cassette fast forward button Cassette stop/eject button Cassette pause button Speaker left Speaker right Stereo headphones jack Fine tuning knob AC socket (power inlet) Battery compartment door Supply voltage: Battery operation: Radio: CD player: Cassette recorder: Headphones jack: 230 V ~ 50 Hz (mains operation) 8 x UM-2 batteries FM / MW 16 track programmable Automatic recording level control (ALC) Stereo, 3. Before operating please check that the VOLTAGE of your unit and the local mains supply VOLTAGE are identical. Disconnect the mains lead from the unit and remove it from the mains socket. [. . . ] Press the stop/eject button (24) every time after use to prolong the life of and prevent damage to the cassettes and cassette drive. The cassette drive stops automatically once the end of the tape has been reached. Playing compact disks / start Note: If skipping of tracks occurs when you play a CD, try turning the volume down. When the CD compartment is closed following the insertion of a CD, the cd led display (13) shows the total number of tracks on the CD, and then the drive stops. When the CD compartment is open or empty, the cd led display (13) shows "00" and then the drive stops. After pressing the play/pause button (12) in "STOP" mode, the first track on the CD will be played. The cd led display (13) shows the number of the track currently being played. A further press on the cd play/pause button (12) continues play from a previous pause. Pressing once on the cd stop button (11) in PLAY or PAUSE mode stops play mode. To repeat a track: Pressing the repeat button (10) once causes the repeat led display (15) to light up and flash continuously. To repeat all the tracks: Pressing the repeat button (10) twice causes the repeat led display (15) to light up continuously. To cancel the repeat function: Press the repeat button (10) until the repeat led display (15) is turned off. If during play or pause mode the cd skip forward button ">>" (7) or cd skip backward button "<<" (8) is pressed once, then the next or last track respectively will be played. If during play mode the cd skip forward button ">>" (7) or cd skip backward button "<<" (8) is pressed and held down, the unit will search forwards or backwards for the track (or within the track) with an audible increase in speed. By pressing the program button (9) once in CD STOP MODE, the program led display (16) lights up. With the cd skip forward button ">>" (7) or cd skip backward button "<<" (8) go to the track you want. [. . . ] WARNING: Always protect the unit from rain and moisture to avoid the danger of fire or electrical short circuit. The components inside the unit are not intended to be user-serviceable. Cleaning the tape heads Remove dust and tape debris from the tape heads regularly. [. . . ]