User manual TYAN THUNDER I7501 PRO

[. . . ] Thunder i7501 Pro /// Revision 1. 00 S2721-533 Copyright © TYAN Computer Corporation, 2002-2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder i7501 Pro S2721-533 are trademarks of TYAN Computer Corporation. [. . . ] If Enabled, you will have to press F1 for the system to continue booting if an error is detected during POST. Toggles display of pressing DEL key to enter BIOS. Parity Check Wait for F1 if "error" Hit "Del" Message 27 http://www. TYAN. com 3. 6 ­ Super IO Configuration Options related to the IO interface can be altered through the following. Enabled Disabled Auto 3F8, 2F8 3E8, 2E8 Output Only Bi-directional EPP Toggles use of serial ports 1 and or 2. Enabling ports also requires you to enter the I/O address for that port unless you select Auto. Two-way protocol Enhanced Parallel Port may provide higher bandwidth if an EPP compliant device is used (e. g. Enhanced Compatibility Port may provide higher bandwidth if an ECP compliant device is used (e. g. (IRQ 7 and IRQ 5 both can be defaults. ) Serial Port 1, 2 Address Parallel Port Address Parallel Port Mode ECP Parallel Port IRQ IRQ 7 IRQ 5 3. 7 ­ Onboard Device Configuration Options related to onboard devices can be altered through the following. Onboard ATI RageXL Video Onboard 82551 Onboard 82546 Onboard SCSI Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Toggles the onboard ATI video graphics. Toggles the onboard SCSI controller. 3. 8­ USB Configuration Options related to USB can be altered through the following. USB Function Legacy USB Support USB Zip Emulation Type USB Beep Message Enabled Disabled Enabled Disabled Auto Enabled Disabled Auto Enabled Disabled Toggles the onboard USB ports. Toggles USB beep error messaging. 28 http://www. TYAN. com 3. 9 ­ PCIPnP Options related to the Plug and Play PCI settings interface can be altered through the following. Yes No Yes No 32, 64, 96, 128, 160, 192, 224, 248 Yes No Enabled Disabled Toggles the option of letting the OS take care of IRQ routing or the BIOS. Palette Snooping can fix color problems associated with non-standard video cards such as MPEG decoders. Toggles the onboard IDE controllers to operate in BusMaster mode. Plug & Play OS Reset Config Data PCI Latency Timer Allocate IRQ to PCI VGA Palette Snooping PCI IDE BusMaster Offboard PCI/ISA IDE Card IRQ 3, 4, 5, 7, 9, 10, 11, 14, 15 DMA Channel 0, 1, 3, 5, 6, 7 Enabled Disabled Auto Enables the system to recognize and boot Enabled from an add-in IDE controller card. Disabled These settings enable you to set which IRQs will be reserved for other devices other than the ones that use them by default. These settings enable DMA channel 0 and 1 to be enabled or disabled. 3. 10 ­ Chipset Options related to the chipset can be altered through the following. CPU Configuration North Bridge ICH3 South Bridge Intel PCI-64 Hub 2 All settings discussed in following sections. 29 http://www. TYAN. com 3. 11 ­ CPU Configuration Options related to the CPU chipset settings can be altered through the following. CPU Ratio Status Unlocked 20 Auto detects CPU speed. It is recommended to leave as default (255), because changing CPU ratios may render your system inoperable. If an invalid ratio is set in CMOS then actual and setpoint values may differ. To modify, hit backspace and type new ratio. CPU Ratio Actual Value CPU Ratio CMOS Setting 255 Hyper-Threading Enable This setting allows you to take advantage of Hyper-Threading enabled Xeon processors. Enabling Hyper-Threading allows a compatible Xeon processor to process applications that are written for a multi-processor system even if you are using only one Xeon processor. 3. 12 ­ ICH3 Chipset Configuration Please leave all options in this section at their default setting because they are crucial to the stability of the system. ICH3 Dev31 Func1, IDE ICH3 Dev31 Func3, SMBUS ICH3 Dev29 Func0, USB#1 ICH3 Dev29 Func1, USB#2 ICH3 Dev29 Func2, USB#3 LPC 2Eh-2Fh Decode [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] Controls IDE On/Off Controls SMBUS On/Off Enables external USB 1 Enables internal USB 2 Enables internal USB 3 LPC 2Eh-2Fh Decode Super I/O addres s. (This is a fixed option) IOAPIC IOAPIC 30 http://www. TYAN. com (ICH3 Chipset Configuration continued) DMA-0 Type [LPC DMA] DMA-1 Type [LPC DMA] DMA-2 Type [LPC DMA] DMA-3 Type [LPC DMA] DMA-4 Type [LPC DMA] DMA-5 Type [LPC DMA] DMA-6 Type [LPC DMA] DMA-7 Type [LPC DMA] 3. 13 ­ Intel PCI-64 Hub 2 Chipset Configuration Options related to the Intel PCI-64 hub and its settings can be altered through the following. [. . . ] BMC is a standalone mini-CPU and runs on its own Real Time Operating System (RTOS) to complete all different kinds of tasks. Backed by QLogic's ARM7 technology, IT manager can rest assure his server machines are always taken care. Unlike regular peripheral card such as AGP card, Network card or SCSI card, SMDC does not require any hardware specific driver. As long as a standby power comes into the system, SMDC will begin looking after the system. [. . . ]