User manual TYAN THUNDER N3600M S2932-E

[. . . ] Thunder n3600M /// Version 1. 0 S2932-E Copyright Copyright © TYAN Computer Corporation, 2007. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. ® Marvell is a trademark of Broadcom Corporation and/or its subsidiaries nVIDIA, nForce are trademarks of NVIDIA Corporation. Notice Information contained in this document is furnished by TYAN Computer Corporation and has been reviewed for accuracy and reliability prior to printing. [. . . ] Enabled: informs the PCI devices that an ISA graphics device is installed in the system so the card will function correctly. Enabled: BIOS uses PCI bus mastering for reading / writing to IDE drives. Plug & Play OS No 32 64 96 PCI Latency Timer 128 160 192 224 248 Allocate IRQ to PCI VGA Yes No Disabled Palette Snooping Enabled Disabled Enabled PCI IDE BusMaster 63 3. 9 Boot Menu You can display Boot Setup option by highlighting it using the Arrow ( / ) keys and pressing Enter. The settings are described on the following pages. Main Boot Settings Boot Settings Configuration Boot Device Priority Removable Drives Network Drives ← → Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Configures settings during System Boot. 3. 9. 1 Boot Settings Configuration Sub-Menu Use this screen to select options for the Boot Settings Configuration. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Boot Settings Configuration Quick Boot Quiet Boot AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Keyboard Error Report Wait for ‘F1’ if Error Hit ‘DEL’ Message Display Interrupt 19 Capture Endless Boot [Disabled] [Disabled] [Force BIOS] [On] [Auto] [Disabled] [Enabled] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit 64 Feature Boot Settings Configuration Quick Boot Option Description Enabled Disabled Disabled Enabled This option allows user bypass BIOS self test during POST. Allows user to force BIOS/Option ROM of add-on cards to be displayed during quiet boot. Selects support for PS/2 Mouse. Quiet Boot Add On ROM Display Mode Boot up Num-Lock PS/2 Mouse Support Force BIOS Keep Current On Off Enabled Disabled Auto Disabled Enabled Keyboard Error Report Enable/disable keyboard Error Report on Event Log. Enable/Disable endless loop boot from BBS table. Wait for ‘F1’ If Error Hit ‘DEL’ Message Display Interrupt 19 Capture Enabled Disabled Enabled Disabled Disabled Enabled Enabled Disabled Endless Boot 65 3. 9. 2 Boot Device Priority Use this screen to select options for the Boot Device Priority. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Boot Device Priority 1st Boot Device 2nd Boot Device [xx, xxx-xxxxx:xxx] [xx, xxx-xxxxx:xxx] Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Boot Device Priority 1st Boot Device 2nd Boot Device Option xx, xxx-xxxxx:xxx xx, xxx-xxxxx:xxx Disabled Description Settings for boot priority. These can be customized depending on your preference. 66 3. 9. 3 Removable Drives Use this screen to select options for the Removable Drives. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Removable Drives 1st Drive [1 FLOPPY DRIVE] st ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Removable Drives 1st Drive Option xx, xxx-xxxxx:xxx Disabled Description Specifies the boot sequence from the available devices. 67 3. 9. 4 Network Drives Use this screen to select options for the Network Drives. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Network Drives 1st Drive 2nd Drive [Netwrok: NVIDIA Boo] [Network:2-NVIDIA B] ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Network Drives 1st /2nd Drive Option xx, xxx-xxxxx:xxx Disabled Description Specifies the boot sequence from the available devices. 68 3. 10 Security Menu The system can be configured so that all users must enter a password every time the system boots or when BIOS Setup is entered, using either the Supervisor password or User password. The Supervisor and User passwords activate two different levels of password security. If you select password support, you are prompted for a one to six character password. If you forget it, you must clear CMOS and reconfigure. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Boot Sector Virus Protection [Disabled] Install or change the password. ← → Select Screen ↑↓ Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Feature Security Settings Supervisor Password: Option Not Installed Installed Not Installed Installed __ __ Disabled Description If the password has been set, Installed displays. When it is set to [Enabled], BIOS will issue a virus warning message and beep if a write to the boot sector or the partition table of the HDD is attempted. User Password: Change Supervisor Password Change User Password Boot Sector Virus Protection Enabled 69 3. 11 Chipset Menu This menu allows the user to customize functions of the AMD Chipsets. North Bridge configuration contains options for Memory & CPU settings. Select a menu by highlighting it using the Arrow ( / ) keys and pressing Enter. The settings are described on the following pages. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Options for NB ← → Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit Exit Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. [. . . ] Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally. 91 UltraDMA-33/66/100: a fast version of the old DMA channel. Without a proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. This one port type can function as a serial, parallel, mouse, keyboard or joystick port. It is fast enough to support video transfer, and is capable of supporting up to 127 daisy-chained peripheral devices. [. . . ]