User manual TYAN TOMCAT I875PF

[. . . ] Tomcat i875PF S5105 User's Manual Tomcat i875PF /// Revision 1. 00 S5105 Copyright © TYAN Computer Corporation, 2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat, i875PF and S5105 are trademarks of TYAN Computer Corporation. [. . . ] Enabled / Disabled Resources Controlled By: Default whether system resources are controller by BIOS or by user. Enabled / Disabled PCI 1 INT Assignment: Default item to distribute IRQ to set Device. Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15 Giga LAN INT Assignment: Leave as default. Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15 41 http://www. tyan. com Tomcat i875PF S5105 Chapter 3: BIOS Setup 3. 8 ­ PC Health Status This menu is related to detecting system temperature, voltage, fan and speed. Phoenix ­ AwardBIOS CMOS Setup Utility PC Health Status CPU Warning Temperature Current CPU Temp. Current Power Fan Speed Current Chassis Fan Speed Current CPU Fan Speed Vagp (V) Vcore(V) 3. 3 V +5V +12 V -12 V VBAT (V) 5VSB (V) [Disabled] Item Help _________________________ Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU Warning Temperature: To set the CPU warning temperature. Note: The onboard Winbond 83627HF hardware monitoring ASIC automatically detects the system, motherboard and CPU temperature. The hardware monitor ASIC also detects the voltage output through the voltage regulators. ® 42 http://www. tyan. com Tomcat i875PF S5105 Chapter 3: BIOS Setup 3. 9 ­ Frequency/Voltage Control Options related to control CPU clock and frequency ratio. Phoenix ­ AwardBIOS CMOS Setup Utility Frequency / Voltage Control . CPU Clock Ratio Auto Detect PCI Clk Spread Spectrum CPU Clock [ 12 X ] [Enabled] [Disabled] [133MHz] Item Help _________________________ Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU Clock Ratio: Sets the CPU multiplier. TYAN does not recommend changing this setting from the default setting. 16X. . . 22X / Auto / Default Auto Detect DIMM / PCI Clk: Sets the BIOS to automatically adjust PCI and memory bus speeds accordingly. Enabled / Disabled Spread Spectrum: Reduces interference on the motherboard. Enabled / Disabled CPU Clock: Enter a decimal number to set the front side bus speed of the motherboard. For all purposes and to maintain stability, please keep this setting at its default setting. 100MHz, 133MHz or 166MHz by CPU setting. 43 http://www. tyan. com Tomcat i875PF S5105 Chapter 3: BIOS Setup Phoenix ­ AwardBIOS CMOS Setup Utility 3. 10 ­ Load Fail-Safe Defaults Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Esc: Quit F10: Save & Exit Setup Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item Load Fail-Safe Defaults Load Fail-Safe Defaults (Y/N)?N When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N)?N Pressing `Y' loads the BIOS default values for the most stable, minimal-performance system operations. 3. 11 ­ Load Optimized Defaults Phoenix ­ AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Esc: Quit F10: Save & Exit Setup Load Optimized Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)?N Pressing `Y' loads the default values that are factory settings for optimal performance system operations. 44 http://www. tyan. com Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Optimized Defaults (Y/N)?N Set User Password Save & Exit Setup Exit Without Saving : Select Item Tomcat i875PF S5105 Chapter 3: BIOS Setup 3. 12 ­ Supervisor/User Password Setting Phoenix ­ AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup Enter Password: PnP/PCI Configurations Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving : Select Item PC Health Status Esc: Quit F10: Save & Exit Setup Change/Set/Disable Password You can set either a supervisor or a user password, or both of them. The differences are: Set Supervisor Password: can enter and change the options of the setup menus. [. . . ] BMC is a standalone mini-CPU and runs on its own Real Time Operating System (RTOS) to complete all different kinds of tasks. Backed by Qlogic's ARM7 technology, IT manager can rest assure his server machines are always taken care. Unlike regular peripheral card such as AGP card, Network card or SCSI card, SMDC does not require any hardware specific driver. As long as a standby power comes into the system, SMDC will begin looking after the system. [. . . ]