User manual US ROBOTICS 005686-02 INSTALLATION GUIDE

[. . . ] 1 READ ME FIRST! Pre Pre 56K Faxmodem Installation Guide For Windows 95 For Windows 3. x installation instructions, refer to the electronic manual on the ConnectionsTM CD-ROM. Write the m The serial sticker on modem's b Shut down 2 Con Connect o included) computer NOT back 232, 1 or PAR part number 1. 024. 1503-00 Prepar epare installation. Prepare for installation. Write the modem's serial number in the box below. [. . . ] Write down the COM port to which your modem is assigned (for example, ) in the box below. COM Port: ate or other lights itches 3, 5, and 8 tches are located the modem. ) You ble or the wrong gin" section at the ore information. Your Modem Description Here Your Modem Description Here drivers. desktop returns, r CD-ROM drive. nd" screen, you d" part number 1. 024. 1503-00 Before You Before You Begin Use the right cable. To install the modem, you need an RS-232 serial cable. This is also known as a "modem cable" or a "PC to modem" cable. Look at the COM port on the back of your computer to determine the type of cable you need. 3 Con Plug one e You need a DB9/DB25M RS-232 serial cable You need a DB25/DB25M RS-232 serial cable Use the power supply that came with your modem. While other power adapters may fit into your modem's power jack, they may damage the modem or cause it to operate irratically. TELCO jac modem's an analog WAR phone digita unsur Look at the labels. Note these icons on the modem's underside: When you telephone telephone' insert the Connections CD into your CD-ROM If you see a "New Hardware Found" screen have Windows 95 Version A: Choose then click . If you see an "Update Device Driver W screen, you have Windows 95 Version B: . NOTE: If neither screen appears, refer to the "Plug an Connect Connect the modem to an analog phone line. Plug one end of the included phone cord into the on the TELCO jack on the modem (labeled modem's underside) and plug the other end into an analog phone jack. WARNING: Many offices and some homes have digital phone lines. Call your phone company if you are unsure which type of line you have. Play Does Not Detect Your Modem" section of the User Guide and Reference included in this package. Version A Version B When you are not using the modem, you can use a telephone on the modem's phone line. Plug the telephone's cord into the modem's PHONE jack. indows W indows 95 Version A: Type D:\ in the bo then click . If your CD-ROM drive u different letter, type that letter in place of "D" . Windows 95 Version B: Click Version A Your Modem Descripti Version B r CD-ROM drive. nd" screen, you d" oose and Driver Wizard" ersion B: Click 7 Install Connections Install the Connections CD and register your modem. Click and then click . If your D:\setup. exe and then click CD-ROM drive uses a different letter, type that letter in place of "D". to the "Plug and ion of the User's ckage. Version A The Setup Wizard on the CD guides you through installing the Connections program group and registering your modem. [. . . ] Robotics are registered trademarks; x2 andConnections are trademarks of 3Com Corporation or its subsidiaries. All other trademarks are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. [. . . ]