User manual US ROBOTICS USR7905 INSTALLATION GUIDE

[. . . ] Possible Solution It may be necessary to replace your RJ-45 Category 5 Ethernet cable. Possible Solution It may be necessary to reconfigure your operating system. Refer to your operating system's documentation regarding configuration specifics. 5-Port 10/100 Ethernet Switch Quick Installation Guide Model 7905 5 Port 10/100Mbps Ethernet Switch Power 1 2 3 Link/Act 4 5 My 5-Port 10/100 Ethernet Switch is properly connected to my Ethernet-ready device but my connection speed is slow. Possible Solution Verify your network adapter and/or additional Ethernet-ready device supports 100 Mbps. [. . . ] this device must accept any interference received including interference that may cause undesired operations. This equipment uses the following USOC jacks: RJ-45 Radio and Television Interference: This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the manufacturer's instructions, it may cause interference to radio and television communications. The 5-Port 10/100 Ethernet switch has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. Caution to the User: The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. UL Listing/CUL Listing or CSA Certified (7. 5V DC 1 Power Adapters only) This information technology equipment is, UL-Listed and CUL-Listed or CSA-Certified for the uses described in the Quick Installation Guide. Industry Canada (IC) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada. «AVIS : Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de classe B prescrites dans la norme sur le matériel brouilleur : "Appareils Numériques", NMB-003 édictée par l'Industrie Canada. Canada V6V 2G9 CE Compliance This device complies with the requirements of European Directive 1995/5/EC. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 601735157, U. S. A. , declare under our sole responsibility that the U. S. Robotics 5-Port 10/100 Ethernet Switch, model number 7905, to which this declaration relates, is in conformity with the following standards and/or other normative documents: · EN60950 · EN55022 · EN55024 · EN61000-3-2 · EN61000-3-3 We hereby declare that this product is in conformity to all the essential requirements and other relevant provisions of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10 (3) and detailed in Annex II of Directive 1999/5/EC has been followed. Limited Warranty U. S. Robotics warrants to the end user ("Customer") that this hardware product will be free from defects in workmanship and materials, under normal use and service, for the following length of time from the date of purchase from U. S. Robotics' sole obligation under this express warranty shall be, at U. S. Robotics' option and expense, to repair the defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is reasonably available, U. S. Robotics may, in its sole discretion, refund to Customer the purchase price paid for the defective product. Robotics warrants any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period, whichever is longer. ROBOTICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE. Robotics Service Center within the applicable warranty period to obtain warranty service authorization. [. . . ] ROBOTICS NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. ROBOTICS SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U. S. ROBOTICS OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U. S. [. . . ]