User manual US ROBOTICS USR997901 INSTALLATION GUIDE

[. . . ] Possible Solution: Make sure the correct network driver is installed for your operating system. If necessary, try reinstalling the driver. Support Resources Are you still having problems? 1. Go to the Support section of the U. S Robotics Web site at www. usr. com. Many of the most common difficulties users experience have been addressed in the FAQ and Troubleshooting Web pages for your specific product. [. . . ] Declares that this product conforms to the FCC's specifications: Part 15, Class B: Operation is subject to the following conditions: 1) this device may not cause harmful electromagnetic interference, and 2) this device must accept any interference received including interference that may cause undesired operations. This equipment uses the following USOC jacks: RJ-45 Radio and Television Interference: This equipment generates, uses, and can radiate radio frequency energy. If this equipement is not installed and used in accordance with the manufacturer's instructions, it may cause interference to radio and television communications. The 10/100 Ethernet PCMCIA Adapter has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. Caution to the User: The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. UL Listing/CUL Listing This information technology equipment is UL-Listed and CUL-Listed for use with UL-Listed personal computers that have installation instructions detailing user installation of card accessories. Remove the 10/100 Ethernet PCMCIA Adapter from your computer before cleaning. Keep the 10/100 Ethernet PCMCIA Adapter away from a humid environment. Place the 10/100 Ethernet PCMCIA Adapter on a stable surface during installation. All cautions and warnings about the 10/100 Ethernet PCMCIA Adapter should be noted. If one of the following situations arises, have the 10/100 Ethernet PCMCIA Adapter checked by an authorised service centre as listed in the Limited Warranty: · Liquid has penetrated the 10/100 Ethernet PCMCIA Adapter. · The 10/100 Ethernet PCMCIA Adapter has been exposed to moisture. · The 10/100 Ethernet PCMCIA Adapter has been dropped or damaged. · There are obvious signs of breakage on the 10/100 Ethernet PCMCIA Adapter. Do not leave the 10/100 Ethernet PCMCIA Adapter in an environment unconditioned; To avoid damage, do not store the 10/100 Ethernet PCMCIA Adapter at a temperature above 140 F (60 C). For Canadian Network Card Users Industry Canada (IC) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada. «AVIS : Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de classe B prescrites dans la norme sur le matériel brouilleur : "Appareils Numériques", NMB-003 édictée par l'Industrie Canada. Canada V6V 2G9 CE Compliance This device complies with the requirements of European Directive 1995/5/EC. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 601735157, U. S. A. , declare under our sole responsibility that the U. S. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U. S. ROBOTICS OR ITS AUTHORISED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U. S. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. [. . . ] Customer assumes responsibility for the selection of the appropriate applications program and associated reference materials. Robotics makes no warranty or representation that its software products will meet Customer's requirements or work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Robotics software product documentation or specifications as being compatible, U. S. Robotics will make reasonable efforts to provide compatibility, except where the noncompatibility is caused by a "bug" or defect in the third party's product or from use of the software product not in accordance with U. S. [. . . ]