User manual VIETA CPD1000D

[. . . ] Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN N Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: You can find the seral number on the back of the unit. This number i is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. [. . . ] Memory Stick; MMC/SD cards may be directly input through the card reader slot. The USB Socket can be used to supply signals to the unit from USB sources. Insert either a USB source or a Card into the appropriate USB connection point on the right or the MMC/SD card reader on the left. 1) If insert" Memory Stick" card to the DIGITAL CARD socket, the screen displays, " U3" when the unit was switched to DIGTTAL CARD play. 2) If insert " MMC " card or "SD"card , the screen displays " U4" when the unit was switched to DIGITAL CARD play. When playing MP3 songs and digital pictures in USB and Digitial Card, the unit features mute, repeat, and zoom play. NOTE: According to the content of the USB and DIGITAL CARD, the display picture will be different. 3. Press the "USB/CARD" button on the units main panel , and the units would auto detect the USB/CARD socket. If USB/CARD is selected, the unit will begin to read the CARD or USB connected to it . USB/CARD 16 SETUP Menu Setting General Operation&General Setup Page Dolby General Operation 1. Press SETUP to enter the Setup Menu. 2. Press ENTER to enter the next level submenu or confirm your selection. 3. Press to enter the submenu or returen to the previous menu 4. Press to highlight the desired menu. To exit from the menu Press SETUP The settings will be stored in the player's memory even if the player is switched off. - - General Setup Page - TV Display Angle Mark OSD lang SPDIF Output Captions Screen Saver PS On ENG On On Normal/PS Normal/LB Wide Set TV Display Mode 1. Press to highlight 'TV Display'. General Setup Page The options included in General Setup page are:" TV Display", "Angle Mark", "OSD lang", "SPDIF Output", "Captions", "Screen Saver". Follow the steps below: Dolby 16:9 Wide 4:3 Letter Box 4:3 Pan Scan Normal/PS If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. In this case , a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. Wide If you have a wide-screen TV. - - General Setup Page - TV Display Angle Mark OSD lang SPDIF Output Captions Screen Saver Go To General Setup Page 1. Press SETUP to enter the setup menu. TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. 17 SETUP Menu Setting General Setup Page Angle Mark Displays current angle setting information on the right hand corner of the TFT screen if available on the disc. Dolby 1. Press the keys to highlight 'OSD Lang'. SPDIF Output The function is used to select the SPDIF Output:SPDIF Off, SPDIF/ RAW, SPDIF/PCM. Dolby - - General Setup Page - TV Display Angle Mark OSD lang SPDIF Output Captions Screen Saver PS On ENG On On On Off - - General Setup Page - Set Angle Mark TV Display Angle Mark OSD lang SPDIF Output Captions Screen Saver PS On ENG On On SPDIF Off SPDIF/ RAW SPDIF/PCM 1. Press to highlight 'Angle Mark'. OSD Lang You can select your own preferred language seetings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc's default language will be used instead. The OSD language in the system menu will remain once selected. Dolby Setup SPDIF 1. Press the keys to highlight 'SPDIF Output'. 3. Move the cursor by pressing the keys to highlight the selected item. Set the SPDIF Output according to your optional audio equipment connection. [. . . ] Depending on the operating environment, regular inspection and maintenance are recommended after every 1, 000 hours of use. For details, please contact your nearest authorized service center. Humidity -20 C ~ +45 C -20 C ~ +65 C Temperature 65+20% 65+20% Humidity 0 C ~ +45 C -20 C ~ +65 C 65+20% 65+20% The chargeing time is various acording to the transformation of quantity of electric charge 24 Parameters and specifications Electronical parameters Item Power requirements Dimensions (Approx. ) Power consumption Weight (Approx. ) Operating humidity System Laser Signal system Frequency response Signal-to-noise ratio Standard requirement : AC 100-240 V , 50/60 Hz : 260(L)X182(W)X29. 6MM : <10W : 0. 95 kg : 5 % to 90 % :Semiconductor laser, wavelength 650 nm : NTSC : 20Hz to 20 kHz(1dB) :More than 80 dB (ANALOG OUT connectors only) :More than 85 dB (DVD/CD) :Video/Audio cable, Remote control, Stereo headphone, Rechargeable battery, Car cigarette Adapter, antenna, car Bag Dynamic range Accessories VIDEO OUT Output AUDIO OUT Audio :1. 4 Vrms (1 KHz, 0 dB) :Speaker:1WX2, 2XHeadphones output, Spdif output N Note: Design and specifications are subject to change prior notice. Input Video Audio :2 channel : 2Vrms (1KHz 0dB) 25 Troubleshooting tips Troubleshooting tips(Common) Before calling for service, you can check the following items on symptoms and solutions No sound or distorted sound: Ensure that the equipment is connected properly. Ensure that the input settings for the TV and stereo system are proper. No play: Condensation has formed : wait about 1 to 2 hours to allow the player to dry out. [. . . ]