User manual VIETA EVBOX12 BROCHURE

[. . . ] Ink is sticky (P P5 . **** ******* ******* ******* ******* P1 . . 2). Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car (P . 3). Do not use rental CDs with old labels that are beginning to peel off. sticky residue (P . 6). ************** ******* ******* ******* Do not use your CDs with labels or stickers attached. Labels are attached (P . 7). ******* ******* ******* ******* ******* P7 . Do Not Use Special Shape CDs Be sure to use round shape CDs only for this unit and do not use any special shape CDs. [. . . ] TIME SET (CLK) The time on the clock is set to "12:00" by default, Rotate the encoder volume knob to adjust the minutes and hours. Press AUDIO/MENU button to select the hour or minutes. Note: Time format can not to set up, it should be follow the tunner area to change, when is in U. S. A Latin then the time in 12H by default, when is in Europe Latin then the time in 24H by default. LOCAL / DISTANTCE Rotate the encoder volume knob to select the strong local station ( Local Mode ), or access a wider range of using distant mode ( DX ). Programmable Turn-on Volume (P-VOL ) This option allows selection of the volume level the radio will automatically assume when first turned on. " P - VOL 40 " is the default setting, which will turn the radio on at the volume level selected when the unit was last turned off. To program a specific volume level for the radio to turn on at, rotate the volume control to select "VOLUME LEVEL Within 5 seconds. BEEP ON / OFF Rotate the encoder volume knob to select Beep On / Off option. RADIO OPERATIONS 9) RADIO SIGNAL STRENGTH METER (RSLM) This is use to indicate the signal strength of current radio station broadcast. When you choose RADIO mode, it will show on the display. Best reception Worst reception 10) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS) 1. PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that it will stay on each station for about 5 seconds. 2. AUTO MEMORY STORE: Press AS/PS button for couple of seconds to enter Auto Store mode, this feature will automatically scan the current band and enter up to 6 strongest stations into the 6 preset memories. 7) STATION PRESET BUTTONS (M1-M6) 1. Press these buttons briefly to recall the stored stations in the selected band. PI SOUND, PI MUTE When the vehicle is crossing the area where two stations with same AF but different PI code can be received at the same time, the receiver will become unstable, under this situation two modes can be selected. RETUNE L, RETUNE S To determine the initial time of automatic TA Search or PI Search. RETUNE L 90 seconds RETUNE S 30 seconds MASK PI, MASK ALL "PI" is referred to "Different PI with same AF". During AF search, PI stations and non-RDS stations with strong signal will be masked, in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the misjudgment of the radio under interference. MASK ALL mask both PI and strong signal non-RDS stations. - - BR - 11 9. CD OPERATIONS 4) CD SLOT Insert the disc into CD slot. M1) PAUSE BUTTON ( ) Press this button to pause CD play, press again to release pause. M2) SCAN BUTTON (SCN) Press this button, the first 10 seconds of each track will be played sequentially until this button is pressed again, then normal play will resume at the current track. M3) REPEAT BUTTON (RPT) Press this button, the current track will be played repeatedly until this button is pressed again. M4) RANDOM BUTTON (RDM) Press RANDOM BUTTON (RDM) during disc play to play all tracks on a CD in random, shuffled order. 8) TRACK UP AND TRACK DOWN BUTTON Press the Track Up Button to skip to the next track or previous track. Press the Track Down button during play will return to the beginning of the current track, press it one more time to skip to previous skip. [. . . ] Please skip this description if your model is not equipped with this feature. THERE ARE FOUR WAYS TO SELECT YOUR FAVORITE TRACK / DIRECTORY A) SEARCHING TRACK DIRECTLY Under MP3 play mode, press MP3 MENU BUTTON once, the display shows "MP3 T*", enter the desired track number directly, then press MP3 ENTER BUTTON to confirm. The distribution of the number are listed as follow: Number 1 M1 2 M2 3 M3 4 M4 5 M5 6 M6 7 MODE 8 TUNE. DN 9 TUNE. UP 0 DISP Button SEARCH TRACK NUMBER BY USING ENCODER VOLUME KNOB Rotate the ENCODER VOLUME KNOB to scroll through the numbers, then press MP3 ENTER BUTTON to confirm. B) SEACRCHING BY DIRECTORY OR TRACK NAME (1) SEARCH DIRECTORY / TRACK NAME BY USING TUNE UP / DOWN BUTTON Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows " * " , enter the character directly. The unit searches files and directories which have the same character which is inputted by the user. The unit shows these sorted files and directories by TUNE UP / DOWN Button (TUNE DOWN First). [. . . ]