User manual VIETA IP20

[. . . ] 8 Listening to music from an USB or Memory card (SD or MMC): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Listening to Radio Broadcasts: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Listening to music from an auxiliary device: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Clock Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Caution: Be sure to unplug the power cord from the outlet when the unit is not in use for an extended period of time. Note: For saving power, If you don't use any function of the unit for about 30 seconds in playing mode, the LED will turn drak. And if you don't use any function of the unit for about 1 minute in playing mode when using the built-in Recharge Li-lon battery, the LED will turn off. Press any one button to returns to the original display. 7 6 Using the Unit Listening to music from an i-Pod (i-Pod player is not supplied): 1. Place the appropriate corresponding universal i-Pod adaptor, included with i-Pod, into this unit i-Pod docking location, then connect your i-Pod. The i-Pod player stored music will be played automatically, press the (BF) button to temporarily stop the playing, press the button again, it will continue to play. Adjust volume using the volume control knob on the front of the unit or +/- buttons on the remote. Press the (H) button once or more to skip previous one or more tracks of the disc. Press and hold the (H) button to search for the position that you intend to start playing. Press the (G) button once or more to skip forward one or more tracks of the disc. Press and hold the (G) button to search for the position that you intend to start playing. Press the button on the remote in playing mode, all sound will be muted. Press the button again or +/- buttons on the remote or rotate the volume control knob on the front of unit to resume sound. Note: * * * In DC power on mode, directly dock your i-Pod player in the docking for charging. For the purpose of saving power, recharging of your i-Pod is NOT SUPPORTED when the main set is in the STANDBY MODE. Listening to music from an USB or Memory card (SD or MMC): By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the unit, you can enjoy the device's stored music through the speakers of the unit. Insert the USB device's USB plug into the port on the rear of the unit. Press the button repeatedly to select " " or " " source. The i-Pod player stored music will be played automatically, press the (BF) button to temporarily stop the playing, press the button again, it will continue to play. Press and hold the (BF) button for 2 seconds or more to stop the playing. Adjust volume using the volume control knob on the front of the unit or +/- buttons on the remote. Press the (H) button once or more to skip previous one or more tracks of the disc. Press and hold the (H) button to search for the position that you intend to start playing. 8 Press the (G) button once or more to skip forward one or more tracks of the disc. Press and hold the (G) button to search for the position that you intend to start playing. Press the button on the remote in playing mode, all sound will be muted. [. . . ] Point the remote control toward the unit and make sure there is a clear pathway between the remote control lens and the unit. Remove your i-Pod from the dock and check for obstruction on the connectors in the dock and on your i-Pod. Remove your i-Pod from the dock and check for obstruction on the connectors in the dock and on your i-Pod. Please make sure your i-Pod is working properly before docking into the unit. [. . . ]