User manual VIETA VPC UNO

[. . . ] HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). [. . . ] Rotate the Encoder Volume Knob to navigate through all folders and sub-folders on the disc. Press the Encoder Volume Knob for more than three seconds to play the first file in the folder. Press the Encoder Volume Knob for less than three seconds to access the subfolders or files. Rotate the Encoder Volume Knob to navigate, then press the Encoder Volume Knob to confirm and begin file play. During navigation search, press PS or rotate the Encoder Volume Knob counterclockwise to move back to the last upper level of a folder. ID3 INFORMATION DISPLAY If any MP3/WMA file recording with ID3 Tag information. The ID3 information such like Album title, Track title, Artist Title will be displayed and automatic scrolling through the LCD while the file is playing. User also allows pressing the INFO button repeatedly to view the ID3 tag information manually. E - 16 PLEASE READ THIS INSTRUCTION CAREFULLY BEFORE OPERATING THE UNIT 12. USB DRIVE OPERATIONS COMPATIBILITY P . 1 Due to the fast changing technology world, this unit may or may not be compatible to all the USB drive / device available with all the future technology, especially those USB drive / device which require to install a driver. Always choose a compatible USB drive / device which is compatible with this unit. NOTE: START THE USB DEVICE MODE This unit is not compatible with portable Hard-Disk. 1. The USB socket is covered by the USB plastic cover as indicated in picture 1 (P . 1). Flip open the USB plastic cover, and the USB socket will become accessible. P . 2 2. Plug in the USB drive / device completely as indicated in picture 2(P . 2) and display will show "USB PLAY" to indicate that the USB drive / device is being plugged in correctly & the download has begun. NOTE: The unit may take a while to detect or download the USB files, detect & download time may vary depends on the type of USB drive / device. Does not matter the unit is in what mode (TUNER, CD, SD etc), once a USB drive / device is being plugged into the unit, unit will automatically switch to USB mode. All the USB files playback function is same as normal CD or MP3 disc playback. (Please refer to section CD operations & MP3 operations) TO STOP USB PLAYBACK 1. The USB drive / device is unplugged, the unit automatically switch to radio mode. Or user can use mode button to switch to other mode. P . 3 2. User can use the mode button to choose USB mode (only if USB drive / device is inserted in the unit ) or any other modes, when they are in any mode. USB 1. 1 > 320KBPS FILE MANAGE: FAT12 / FAT16/ FAT 32 WARNING 1. Always unplugged the USB gently from the unit, excessive force used will cause permanent & serious damage to the unit & the USB drive / device. (P . 3) 2. Please never intentionally or accidentally hit on the USB drive / device when it is plugged in. This will cause permanent & serious damage to the unit & USB drive / device. (P4) 3. Please never try to plug in any USB drive / device with excessive weight or excessive size into the unit. Please always use USB drive / device with reasonable weight & size which will not overload the unit, which will not make performing normal operation on the front panel impossible. Excessive weight or size USB drive / device may cause permanent & serious damage to the unit. And may cause access to the buttons / knobs on the front panel impossible. P . 4 E - 17 13. [. . . ] Any other mode of this unit cannot activate the Bluetooth audio streaming ( A2DP ) function. If the audio device lost the connectivity or no audio device is connecting with this unit, after mode changed to BT AUDIO mode, the display will show , and if after a 20 seconds time out still cannot find any audio device for connecting, the unit will display for 3 seconds then turn to the Tunner Mode. (3) Once in the "BT AUDIO" mode, user can use the audio device to start playback the song via Bluetooth wireless with this unit. When mode change to BT AUDIO mode, some of the audio device may auto playback the music without operate the music playback operation and some of the device like mobile phone may need to first change into the 'Media Player' mode on the mobile phone otherwise the song cannot be direct playback via Bluetooth wireless. [. . . ]