User manual VIETA VTC1000R

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VIETA VTC1000R. We hope that this VIETA VTC1000R user guide will be useful to you.


VIETA VTC1000R : Download the complete user guide (782 Ko)

You may also download the following manuals related to this product:

   VIETA VTC1000R (2226 ko)
   VIETA VTC1000R DATASHEET (2654 ko)
   VIETA VTC1000R DATASHEET (2654 ko)

Manual abstract: user guide VIETA VTC1000R

Detailed instructions for use are in the User's Guide.

[. . . ] HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). [. . . ] When regional mode is off, the region identification in the PI code is ignored; the radio may switch to a local variant of the current program. When region mode is on, the radio will only switch to a program carrying the exact same PI code. Note: When AF switch is on, at this moment use tuning up/down to search station will only stop at station which has RDS broadcasting. 17)TA BUTTON(TRAFFIC ANNOUNCEMENT) When pressed short, it is activated as TA mode on or off When TA mode is on and traffic announcement is transmittude - When the unit is in CD mode, it will switch to radio mode temporarily. - If the volume lever was under the threshold point, it will be raised to the threshold point. - When TP station is received, TP segment is turned on in LCD display. - EON TA LOCAL mode When the field strength level of EON linked is less than the threshold level. The radio does not switch that station and user can hardly listen to any disturbances. - EON TA DISTANCE mode EON TA switching is try to implemented by the information of current station "EON TA DX" is displayed a few second this mode is selected Note: When TA switch is on, at this moment use tuning up/down to search station will only stop at station which has TA broadcasting. 16)PTY BUTTON Each time when this button is pressed, the PTY mode will toggle in the following order: PTY Music Group -> PTY Speech Group ->PTY Off The current PTY code is displayed on the LCD, use the 6 preset buttons to select the other PTY code, the distribution of program type are as follow: Button Number M1 M2 M3 M4 M5 M6 Music Group POP , ROCK EASY, LIGHT CLASSICS, JAZZ, COUNTRY NATION, OLDIES FOLK Speech Group NEWS, AFFAIRS, INFO SPORT, EDUCATE, DRAMA CULTURE, SCIENCE, VAR IED WEATHER, FINANCE, CHILDREN SOCIAL, RELIGION, PHONE IN TRAVEL, LEISURE, DOCUMENT When PTY code is selected, the radio will search the band for the station that matches the PTY code. BR - 9 OVERVIEW OF THE RDS FUNCTION Radio Data System (RDS) is a broadcasting service that allows FM stations to send additional digital information along with the regular radio program signal. Here are just a few: - PI (Program identification) It is a code that identified RDS stations; it is unique for each station. - PS (PROGRAM Service Name) The name of current station, it is shown on the display. - AF (Alternative Frequencies List) The list(s) of Alternative Frequencies give information on the various transmitters broadcasting the same program in the same or adjacent reception area. If the main frequency should get worse, the radio will tune automatically to the strongest Alternative frequency. - TP (Traffic Program) If the tuned program carries Traffic Announcement, the TP indicator will turn on. - TA (Traffic Announcement) When an actual traffic bulletin is on air, the TA indicator will also turn on. - PTY (Program Type Codes) This code is used to designate the current program material being broadcast. With this feature, you can search the programs that match the selected program type, which is chosen from a specific list of types. - TP (Traffic Program) If the tuned program carries Traffic Announcement, the TP indicator will turn on. - PTY (Program Type Codes) This code is used to designate the current program material being broadcast. With this feature, you can search the programs that match the selected program type, which is chosen from a specific list of types. - EON (Enhanced Other Networks Information) It is a supplementary service enabling the radio to obtain information not only from the current station but also from the others. - CT (Clock Time) This function permits to update the clock of the receiver the nation from which the station is broadcasting (from PI). It could happen that on the display will be shown the wrong hour; this happens because in Italy the Clock Time function is not working yet. Notes Depending on the country or region, not all of the RDS functions are available in Italy. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. BR - 10 PROGRAMMABLE OPTIONALS To use this function keep press long AUDIO MENU Button for few seconds, each time you press this button the mode will move and the functions will shown on the display, turn the encoder volume knob up/ down to set the desires functions , the function states as following: - TA SEEK, TA ALARM To determine what action will the radio take if the newly tuned station does not receive TP information for 5 seconds. TA SEEK The radio retunes to a different station which contains TP information. PI SOUND, PI MUTE When the vehicle is crossing the area where two stations with same AF but different PI code can be received at the same time, the receiver will become unstable, under this situation two modes can be selected. [. . . ] If the selected name is directory, the user can go into the selected directory by press MP3 ENTER BUTTON and continue to search the directory or file name in the directory by BR - 15 TUNE UP / DOWN Button (TUNE DOWN First). The selected file can be played by pressing MP3 Enter Button The distribution of alphabetical characters are listed as follow : Button M1 M2 M3 M4 M5 M6 MODE TUNE DN TUNE UP V, W , X SEL VOL UP/DN Character A, B, C D, E, F G, H, I J, K, L M, N, O P , Q, R S, T, U Y, Z, Space _, -, + Move Cursor Next/Previous Character (2) SEARCH DIRECTORY / TRACK NAME BY USING ENCODER VOLUME KNOB Under MP3 Play Mode, press MP3 MENU BUTTON twice, the display shows " * ". The unit searches files and directories which have the same character which is inputted by the user. The unit shows these sorted files and directories by ENCODER VOLUME KNOB (ROTATE ANTI-CLOCKWISE First). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE VIETA VTC1000R




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VIETA VTC1000R will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.