User manual VIEWSONIC EP5502

[. . . ] For Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic EP5502 i Important Safety Instructions 1. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] Copy all media files under the root directory in memory card, and delete the files that are not used to play. Notes for CF card: before inserting CF card turn off the power, aligning the contact pins, do not insert with over strength, otherwise it will bend the pins and may burn off the decoder board or driver board. · 1. 2 System description Adopting signal-chip 1080P solution combined with decoder and driver, the system is stable and reliable with long time work. It supports to read, decode and play AV files from flash disk and other memory cards. When there is CF card in the machine, the media files will be imported from flash disk to the CF card automatically if plugged in flash disk. Auto copy function: Import the media file from flash disk to memory card automatically. Auto play system: users can set up time to switch input signal from different ports andinternal storage. Seamless play: no black screen when program is switched by following below requirements. 1) All of the media files should be the same format, for example it can support suffix . TS/. 2) The resolution, codec, code rate, frame rate should be the same for all video files, and the audio coder, sample rate should be the same for all audio files. Note: If high-definition (HD) playing combines with standard definition (SD) video file, it should be followed as below: 1) Use video converter (like Ulead Video Studio) to convert the SD and HD video files to be one HD video program. 2) Use video converter (like Ulead Video Studio) to convert the resolution, codec and frame rate of SD file to be the same as the HD video file. LTI/CTI to improve the color performance 10 Bit ADC conversion and processing Dynamic adaptive smoothing filter Interlace convert to progressive interlace Digital decoding and digital comb filter Supports PAL/SECAM/NTSC video formats · 1. 5 Internal media player support format 1. File format Regular play Video Codec Mpeg1, 2 MPEG2 , H. 264 MPEG2 MPEG4 Xvid 1. 00, Xvid 1. 01, Xvid 1. 02, Xvid 1. 03, Xvid 1. 10-beta1/2 H. 264 H. 264, MPEG1, 2, 4 Seamless play Video Codec Mpeg1, 2 MPEG2 , H. 264 Photo jpeg Container MPG, MPEG MPEG2 ­TS H264-TS Container . jpg Container MPG, MPEG MPEG2 ­TS H264-TS MPEG2 ­PS AVI, MP4 MKV Supported audio coded format Audio WMA, MP3, M4A(AAC) ViewSonic EP5502 3 2. DO NOT support DIVX6. x, MSVC/CRAM, MP42, GMC, IV32, RLE, cvid, VC1, RV20, WMV 3. > Auto play system: Play Media, Function Mode, Time Mode > Play media: Play programs stored in CF card automatically ViewSonic EP5502 7 Off Off Off Off Auto play system Auto Play Configuration Play Port 1 Storage Start Time Port 0:00 Storage 0:00 Storage 0:00 Storage 0:00 Storage Return Play Media Time Set 0:00 End Time 0:0 0:0 0:0 0:0 Function Mode: programs can be played repeatedly according to pre-setup time. Press button to select item and press to set up parameter. Auto play system Auto Play Configuration Play Port 1 Storage Start Time Port 0:00 Storage 0:00 Storage 0:00 Storage 0:00 Storage Off Off Off Off Return Function Mode Time Set 0:00 End Time 0:0 0:0 0:0 0:0 Time mode: It will play according to programmed schedule. >Seamless play: The video file will play seamlessly if this function is turned on. If this function is enabled, the file format should be the same (including AV resolution, frame rate and other specification), otherwise there will be abnormalities. Image play time: Set interval time from 5s to 60s, change by 5s every time. Display: > Set screen Brightness, Contrast, Color, Sharpness, Tint > Aspect ratio: Full, 4:3, 16:9, Zoom1, Zoom2, Auto. > PC Setting: only applicable with VGA port > Auto Adjust: adjust automatically according to the input signal ViewSonic EP5502 8 > Horizontal Pos. / Vertical Pos. : adjust the position > Clock: adjust the clock > Phase: adjust the phase Clock Setup: Press button to select desired items and press setup parameter. ON/OFF Time Setup: It can be set to two modes: Uniform Mode, Week Mode Uniform Mode: Set it for the whole one week, for example, turn it on at 8 am, and turn it off at 10 Pm. [. . . ] 1a 02-11-09 ViewSonic EP5502 13 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. Effect of state law: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. [. . . ]