User manual VIEWSONIC N3290W

[. . . ] ViewSonic LCD TV ® N3290w/N4290p/N4790p ViewSonic® Contents Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Antenna Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To get an optimal viewing, it is advised to turn your DVD player to one of the following TV display standards:1280x720p@ 60hz (7)VGA Signal Input: Use the VGA signal cable to connect signals from a PC to the TV Input. Connect the PC audio cable supplied with the TV to the TV's PC Audio Input. Note: If no signal is present on the VGA screen, the TV will enter into standby mode automatically after 60seconds. ViewSonic 10 N3290w/N4290p/N4790p Signal Source Interface from Side View (8) AV1 & S-Video1 Input: Connect the Video signal or S-Video cable to DVD player, Laser Disc player, videocassette recorder or camcorder (Note: For S-Video, Audio and AV1 are shared). Audio Input: Connect the audio signal source (PC, DVD player, Laser Disc player, videocassette recorder or camcorder) to the audio Input ports. (Note: S-Video2 & AV2 are shared same audio input). Helpful Hints: S-Video shares audio signal with Video 2. ViewSonic 11 N3290w/N4290p/N4790p To Use Remote Control Sleep/ With this key you can set a time period after which the TV should switch itself to standby. Display/ Pressing once displays a variety of information such as the current channel and the input source. CH / When in menu mode, use this button to select to the up/down; otherwise, to change TV channels. Recall/ To display the previously TV channel VOL Use this button to confirm selection or adjust the desired parameter; otherwise, to increase /decrease the volume Exit/ Exits the OSD menu (onscreen display). (The options of aspect ratio may be different according to its input source) Sound Effect/ To select Stereo, News, Movie, Music, Surround, Stereo available. Included: User, Drama, DV, Sport, Movie. Press these buttons to navigate the OSD menus. Enter/ Press the button to confirm selection. ViewSonic 12 N3290w/N4290p/N4790p Remote Control Battery Installation Follow the steps below to insert batteries. Ensure that the positive and negative ends match as indicated on the bottom of the battery compartment. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. When the remote control will not to be used for an extended period, remove the batteries. 7. If the battery fluid leaks inside the remote control, clean the battery compartment carefully and insert new batteries. Dispose of the used batteries in accordance with the instructions on the battery. ViewSonic 13 N3290w/N4290p/N4790p OSD function To Use the OSD Menu All the functions for the LCD TV are control either by the remote control or the control button on the front control screen at bottom of right side. Use the Left or Right buttons to enter into the submenu, or to enable or adjust the selected function. The function where the cursor is located is the one that can be adjusted. Press the Exit button to exit the OSD menu. To Select Input Source In different input source, the functions can be adjusted are different. It offers the following input source: TV, AV1, AV2, S-Video1, S-Video 2, YPBPR, HDMI1, HDMI2 & VGA. OSD Menu in AV/TV Mode Press the MENU button on the remote control to display the OSD main menu. It offers the following options: Picture Setting, Sound Setting, Setup Setting & TV Setting. [. . . ] Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. Any product on which the serial number has been defaced, modified or removed. [. . . ]